牌号简介 About |
---|
聚醚嵌段酰胺Pebax® 2533 SA 01是由柔性聚醚和刚性聚酰胺制成的热塑性弹性体。这种SA等级是专门为食品用途设计的。它的化学结构还能够吸收和控制挥发性分子(芳香剂、油、杀虫剂等)的释放。 Polyether block amide Pebax® 2533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses. Its chemical structure also enables the absorption and the controlled release of volatile molecules (fragrances, oils, insecticides...). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.00 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate 2 |
Internal Method | ||
TD:4.0 mm,24 hrs TD:4.0 mm,24 hrs |
0.80 | % | 内部方法 |
MD:4.0 mm,24 hrs MD:4.0 mm,24 hrs |
0.50 | % | 内部方法 |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.40 | % | ISO 62 |
23℃,24hr 23℃,24hr |
1.2 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ISO 868 | ||
邵氏 A Shaw's A |
ISO 868 | ||
邵氏 A,15 秒 Shore A, 15 seconds |
ISO 868 | ||
邵氏 D Shaw's D |
ISO 868 | ||
邵氏 D,15 秒 Shore D, 15 seconds |
ISO 868 | ||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179 | ||
-30℃ -30℃ |
ISO 179 | ||
23℃ 23℃ |
ISO 179 | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179 | ||
-30℃ -30℃ |
ISO 179 | ||
23℃ 23℃ |
ISO 179 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306 | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Mold at 40°C |
【新闻资讯】查看全部
Olin德国环氧树脂厂恢复生产,氯碱厂一开一停
2022-06-17 6月14日,Olin宣布其位于路易斯安那州的Plaquemine氯碱厂的一半已恢复运营。该工厂自2022年4月以来一直处于关闭状态,其余工厂预计将于2022年8月初恢复运行。 Olin位于德克萨斯州Freepor |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |