牌号简介 About |
---|
用于经济地防止磨损和磨损的碳化硅填充环氧腻子预期用途:涉及颗粒小于1/16的应用:管道弯头、粉碎机和泥浆管线、旋风分离器和抽风机、斜槽产品特点:无下垂、极耐磨、室温固化 Silicon carbide-filled epoxy putty for economical protection against wear and abrasion Intended Use: Applications involving particulate less than 1/16": pipe elbows, pulverizers and slurry lines, cyclones and exhauster fans, chutes Product features: Non-sagging Extremely wear resistant Room temperature cure |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.75 | g/cm³ | |
特定体积 Specific volume |
0.574 | cm³/g | |
收缩率 Shrinkage rate |
|||
MD MD |
0.090 | % | ASTM D2566 |
固体含量 Solid content |
|||
by Volume by Volume |
100 | % | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电常数 Dielectric constant |
25.0 | ASTM D150 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐热温度 Heat resistant temperature |
|||
Dry Dry |
℃ | ||
Wet Wet |
℃ | ||
拉伸剪切强度 Tensile shear strength |
MPa | ASTM D1002 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability |
|||
24 ℃ 24 ℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
世林在CHINAPLAS时期推出新型回收机器Repro-Flex
2016-04-15 世林机械(POLYSTAR)将在CHINAPLAS 2016期间展示其最新回收机器Repro-Flex。 世林机械将参展CHINAPLAS 2016 < |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |