牌号简介 About |
---|
适用于铸造拉伸膜、层压膜、电线和电缆,以及一般用途的膜应用。特点:强度高,韧性好,易加工透明铸膜。也适用于电线电缆及高强度吹膜,防滑,加工性能优异。为了提高透明度,建议与低密度聚乙烯混合。 Applications: For cast stretch film, lamination film, wire and cable, and general purpose film applications. Characteristics: High Strength, tough, and easy processability transparent cast film. Also used for wire and cable and high strength blown film, non-- slip with excellent processability. For higher transparency, blending with LDPE is recommended. |
产品描述 Product Description
用途:薄膜;电线电缆应用;流延薄膜;层压板;拉伸缠绕;混合;
加工条件:流延薄膜
性能特点: 表面光滑度低; 机械强度好; 韧性好; 易加工; Good Rigidity,Excellent Processability,Good flexibility,Low smoothness
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.921 | g/cm³ | ASTM D792-A |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
2.2 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
摩擦系数 friction coefficient |
|||
静态 static state |
> 0.51 | ASTM D1894 | |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness |
|||
测试 test 2 |
20 | µm | |
测试 test 3 |
30 | µm | |
割线模量 - 1% 正割,MD Secant modulus -1% secant, MD |
ASTM D882 | ||
-- -- 3 |
MPa | ASTM D882 | |
-- -- 2 |
MPa | ASTM D882 | |
割线模量 - 1% 正割,TD Secant modulus -1% secant, TD |
ASTM D882 | ||
-- -- 2 |
MPa | ASTM D882 | |
-- -- 3 |
MPa | ASTM D882 | |
拉伸强度 tensile strength |
ASTM D882 | ||
MD,断裂,吹塑薄膜 MD, fracture, blow molded film |
MPa | ASTM D882 | |
MD,断裂,挤塑薄膜 MD, fracture, extruded film |
MPa | ASTM D882 | |
拉伸强度 tensile strength |
ASTM D882 | ||
TD,断裂,吹塑薄膜 TD, fracture, blow molded film |
MPa | ASTM D882 | |
断裂,挤塑薄膜 Fracture, extruded film |
MPa | ASTM D882 | |
拉伸应变 Tensile strain |
ASTM D882 | ||
MD,断裂,吹塑薄膜 MD, fracture, blow molded film |
% | ASTM D882 | |
MD,断裂,挤塑薄膜 MD, fracture, extruded film |
% | ASTM D882 | |
拉伸应变 Tensile strain |
ASTM D882 | ||
TD,断裂,吹塑薄膜 TD, fracture, blow molded film |
% | ASTM D882 | |
TD,断裂,挤塑薄膜 TD, fracture, extruded film |
% | ASTM D882 | |
落锤冲击 Drop hammer impact |
ASTM D1709 | ||
铸造薄膜 Casting thin film |
g | ASTM D1709 | |
吹塑薄膜 Blown film |
g | ASTM D1709 | |
埃尔曼多夫抗撕强度 - MD Elmandorf Tear Strength - MD |
ASTM D1922 | ||
铸造薄膜 Casting thin film |
g | ASTM D1922 | |
吹塑薄膜 Blown film |
g | ASTM D1922 | |
撕裂强度 tear strength |
ASTM D1922 | ||
TD,铸造薄膜 TD, cast thin film |
g | ASTM D1922 | |
TD,吹塑薄膜 TD, blow molded film |
g | ASTM D1922 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
℃ | DSC | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
ASTM D2457 | ||
45°,吹塑薄膜 45 °, blow molded film |
ASTM D2457 | ||
45°,铸造薄膜 45 °, cast thin film |
ASTM D2457 | ||
雾度 Haze |
ASTM D1003 | ||
铸造薄膜 Casting thin film |
% | ASTM D1003 | |
吹塑薄膜 Blown film |
% | ASTM D1003 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Cast |
3 Blown |
【新闻资讯】查看全部
揭阳空港经济区一塑料厂房发生火灾
2021-05-02 搜料网资讯: 4月26日,广东揭阳空港经济区渔湖镇西寨工业区内一塑料厂房起火,市消防救援支队指挥中心调派14辆消防车66名消防员赶赴处置。目前明火被扑灭,未造成人员伤亡。 |