牌号简介 About |
---|
Bayflex® XGT-140是一种用于反应注射成型(RIM)工艺的弹性聚氨酯系统。该体系分为两种液体组分:A组分为改性二苯基甲烷二异氰酸酯(MDI),B组分为聚醚多元醇体系。Bayflex® XGT-140系统的延长凝胶时间使设备设计者能够灵活地创建可在现有注塑机上成型的大型复杂零件。该树脂具有优良的表面质量和高抗冲击性,可用于农业设备、重型卡车、特种运输和海洋应用。与任何产品一样,用户必须提前对给定应用中Bayflex® XGT-140系统的使用进行测试(包括现场测试等),以确定其适用性。 Bayflex XGT-140 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT-140 system gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin 's excellent surface quality and high impact resistance make it a candidate for agricultural equipment, heavy-duty trucks, specialty transportation, and marine applications. As with any product, use of the Bayflex XGT-140 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
产品描述 Product Description
厂家:德国科思创 Covestro
类别:PUR-脂肪族+MDI PUR-脂肪族+MDI
用途:船舶应用;农业应用;
加工条件:反应注射成型 (RIM)
性能特点: 冲击性能好; 表面光泽度好; Good surface appearance,High impact resistance
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 | g/cm³ | ASTM D792 , ASTM D1622 |
收缩率 Shrinkage rate |
|||
MD:3.2 mm MD:3.2 mm |
0.85 | % | 内部方法 |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸应变 Tensile strain |
|||
断裂,3.18 mm Fracture, 3.18 mm |
80 | % | ASTM D638 |
断裂,3.18 mm Fracture, 3.18 mm |
80 | % | ASTM D412 |
撕裂强度 tear strength 2 |
|||
3.18 mm 3.18 mm 2 |
123 | kN/m | ASTM D624 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm 3.2mm |
J/m | ASTM D256 | |
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments 3 |
ASTM D3763 | ||
-30℃,3.18 mm -30℃,3.18 mm |
J | ASTM D3763 | |
23℃,3.18 mm 23℃,3.18 mm |
J | ASTM D3763 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Heat Sag(4 in Overhang,121℃,3.18 mm) Heat Sag(4 in Overhang,121℃,3.18 mm) 5 |
cm | ASTM D3769 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,3.18 mm Shaw D, 3.18 mm |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
断裂,3.18 mm Fracture, 3.18 mm |
MPa | ASTM D412 | |
断裂,3.18 mm Fracture, 3.18 mm |
MPa | ASTM D638 | |
弯曲模量 Bending modulus |
ASTM D790 | ||
-30℃,3.18 mm -30℃,3.18 mm |
MPa | ASTM D790 | |
23℃,3.18 mm 23℃,3.18 mm |
MPa | ASTM D790 | |
65℃,3.18 mm 65℃,3.18 mm |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,3.2 mm 0.45 MPa, unannealed, 3.2 mm |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:3.2 mm MD:3.2 mm |
1/℃ | ASTM D696 | |
热固组件 Thermosetting components 4 |
|||
部件 A Component A |
|||
部件 B Component B |
|||
脱模时间 stripping time |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具 |
3 7.33 ft/sec |
4 1.05 Index |
5 1 hr |
【新闻资讯】查看全部
1-5月中国挤出机出口下降半成
2017-07-17 2017年1-5月,中国挤出机进口422台,同比上升20.9%;进口金额为12943万美元,同比下降27.2%;出口7098台,同比减少79.9%,出口金额为14287万美元,同比下降5.2%。 5月,中国挤出机进口75台,同比增长15.4%,环比下降21.1%;进口金额2003万美元,同比增长6.8%,环比下降14.4%;出口1199台,同比增长29.6%,环比下降6.8%;出口金额3098万美元,同比增长31.7%,环比减少1.0%。 1-5月,中国挤出 |
1-5月中国挤出机出口下降半成 2017年1-5月,中国挤出机進口422台,环比升高20.9%;進口金额为12943万美金,同比减少27.2%;出口7098台,同比减少79.9%,出口金额为14288万美金,同比减少5.2%。 5月,中国挤出机進口75台,同比增长率15.4%,环比下降21.1%;進口金额2003万美金,同比增长率6.8%,环比下降14.4%;出口1199台,同比增长率29.6%,环比下降6.8%;出口金额3098万美金,同比增长率31.7%,同比降低1.0%。 1-5月,中国挤出机进出口贸易赤字额为1344万美金,在其中,5月份的贸易赤字额为1095万美金。 進口状况: 从图1看来,1-5月,中国挤压在進口的金额与总数呈反过来的趋势,即总数提高金额降低,相反也是。 从数据图表2看来,2017年的前5个月中,虽然法国和日本的金额同比减少了41.1%和39.9%,但仍然是中国挤压進口的前俩位。英国则以99.1%的高增福稳居第三。 中国中国台湾、法国、德国、日本、荷兰等五个我国或地域均有较大幅的升高,在其中,法国的增长幅度最大,做到了447.3%。 西班牙、德国2个我国则有较大幅的降低。 出口状况: 从图3中能够 看得出,中国挤出机出口金额在5月份环比出現大幅提高,总数上也是有较大幅提高。 数据图表4数据统计显示信息,1-5月份,印尼仍然是中国挤出机的较大 出口国。越南地区稳居第二位,且降低了10.9%。 英国增长幅度最大,为77.8%;沙特减幅最大,为39.8%。 来源于:聚风塑胶 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
价格走势图
开始时间:
结束时间:
材料厂家:
【牌号齐全,内容全面】
全网共2500+项牌号+上游原料单体+原油价格,最长可追溯近20年价格行情
【精准,及时,权威!】
专业团队挖掘行情信息,第一时间发布行情
抱歉!该牌号暂无认证数据。
免责声明:参考价格是搜料网根据网络大数据拟合分析的结果,仅供参考。实际成交价取决但不限于以下因素:下单时间,付款方式,交货方式,数量,税费,色号,产地,项目信息。
抱歉!暂无数据。
抱歉!暂无数据。