牌号简介 About |
---|
Techsil® EP25485是一种低粘度、导热的阻燃灌封化合物。混合体系具有较长的使用寿命,可以热固化或冷固化。该系统表面光洁度好,电强度高,导热性好,固化收缩率低。EP25485在较宽的温度范围内与大多数电路板元件和材料兼容。对大多数塑料和基材的粘附性都很好。性能的结合和材料的易用性将使其适用范围广泛。EP25485中的阻燃剂为无卤型,不含重金属。它以散装、套件和Twinpack形式提供。标准颜色为黑色,但可根据要求提供其他颜色。特点:优良的导热性、高电绝缘性能、无毒、低收缩、高附着性、阻燃性好、耐化学性和耐水性好、符合RoHS和WEEE标准。 Techsil EP25485 is a low viscosity, thermally conductive flame retardant potting and encapsulating compound. The mixed system has a long usable life and may be hot or cold cured. The system exhibits a good surface finish, high electrical strength, excellent thermal conductivity and low cure shrinkage. EP25485 is compatible with most circuit board components and materials over a wide temperature range. Adhesion is excellent to most plastics and substrates. The combination of properties and the ease of use of the material will lend itself to a wide range of applications. The flame-retardants in EP25485 are of a non-halogen type and do not contain heavy metals. It is available in bulk, kits and twinpack form. The standard colour is Black but other colours are available on request. Features: Excellent thermal conductivity High electrical insulating characteristics Non-toxic Low shrinkage High adhesion Flame retardant to UL94-V0 Good chemical and water resistance RoHS and WEEE compliant |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
|||
Volume Volume |
0.30 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
3.5E-5 到 4.5E-5 | 1/℃ | |
导热系数 Thermal conductivity coefficient |
1.2 | W/m/K | |
热变形温度 Hot deformation temperature |
80 | ℃ | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
V-0 | UL 94 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Loss Tangent Loss Tangent 2 |
|||
工作温度 working temperature |
℃ | ||
放热峰值 exothermic peak |
|||
25℃ 25℃ |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 3 |
|||
-- -- 4 |
|||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Resin Resin |
|||
Hardener Hardener |
|||
体积混合比(PBV) Volume Mixing Ratio (PBV) |
|||
Resin Resin |
|||
Hardener Hardener |
|||
密度 Density |
|||
-- -- 4 |
g/cm³ | ||
-- -- 5 |
g/cm³ | ||
-- -- 3 |
g/cm³ | ||
粘度 viscosity |
|||
25℃ 25℃ 4 |
Pa·s | ||
25℃ 25℃ 5 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
固化时间 Curing time |
|||
80℃ 80℃ |
hr | ||
60℃ 60℃ |
hr | ||
25℃ 25℃ |
hr | ||
胶凝时间 Gelation time |
|||
25℃ 25℃ |
min | ||
储存稳定性 storage stability |
|||
25 ℃ 25 ℃ |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
吸水率 Water absorption rate 6 |
|||
20℃ 20℃ 6 |
% | ||
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
拉伸强度 tensile strength |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
压缩强度 compressive strength |
MPa | ||
耐电强度 Electrical strength |
kV/mm | ||
相对电容率 Relative permittivity |
|||
50 Hz 50 Hz |
|||
体积电阻率 Volume resistivity |
ohms·cm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 50 Hz |
3 Resin |
4 Hardener |
5 Mixed |
6 30 days |
【新闻资讯】查看全部
今年山东高端化工营收力争9500亿
2022-04-16 山东省政府办公厅日前印发十大创新十强产业十大扩需求2022年行动计划。在十强产业中,明确全省高端化工要壮大产业规模,做强产业体系,计划2022年实现营业收入9500亿元左右,占全 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |