牌号简介 About |
---|
适用于各种家用物品的材料,如电器附件。与标准注射尿素相比,INJC为暴露在高温下的塑件提供了更高的稳定性。其较低的粘度改善了模具填充特性。 Material suitable for a wide range of household articles such as Electrical accessories. Compared to standard Injection urea, INJC offers an improved stability for mouldings exposed to elevated temperatures. Its lower viscosity gives improved mould filling characteristics. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.53 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
ISO 2577 | ||
-- -- 2 |
0.80 | % | ISO 2577 |
-- -- 3 |
0.73 | % | ISO 2577 |
吸水率 Water absorption rate |
ISO 62 | ||
Cold Cold 4 |
52.0 | mg | ISO 62 |
Hot Hot 5 |
305.0 | mg | ISO 62 |
后收缩 Post contraction |
ISO 2577 | ||
-- -- 2 |
% | ISO 2577 | |
-- -- 6 |
% | ISO 2577 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲强度 bending strength |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
kJ/m² | ISO 180/C | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/Ae | |
Martens Temperature Martens Temperature |
℃ | DIN 43458 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
IEC 60243-1 | ||
-- -- 2 |
kV/mm | IEC 60243-1 | |
-- -- 7 |
kV/mm | IEC 60243-1 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60167 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Preheated powder |
3 Cold powder |
4 24 hr @ 23°C |
5 30 min @ 100°C |
6 (48 hr) Preheated powder |
7 (90°C) Preheated powder |
【新闻资讯】查看全部
欧洲能源巨头道达尔宣布退出俄罗斯
2022-08-30 扫描上图二维码,可以免费下载 搜料 APP 在这个关键时刻,欧洲能源巨头突然发出了撤退信号。 最近,法国能源公司道达尔能源公司(TotalEnergies )表示,将把位于俄罗斯的天然气项目T |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |