牌号简介 About |
---|
STYCAST® 2017M4是一种为蓝光发光二极管开发的环氧封装材料。 STYCAST 2017M4 is an epoxy encapsulant developed for blue Light Emitting Diodes. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.19 | g/cm³ | |
吸水率 Water absorption rate |
|||
100℃,1hr 100℃,1hr |
0.40 | % | |
25℃,24hr 25℃,24hr |
0.18 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
136 | ℃ | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
< 136℃ < 136℃ |
6.3E-5 | cm/cm/℃ | |
> 136℃ > 136℃ |
cm/cm/℃ | ||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
|||
5000 µm,450 nm 5000 µm,450 nm |
% | ||
5000 µm,550 nm 5000 µm,550 nm |
% | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积收缩 Volume contraction |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
|||
-- -- 3 |
|||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Resin Resin |
|||
Hardener Hardener |
|||
密度 Density |
|||
25℃ 25℃ 5 |
g/cm³ | ||
25℃ 25℃ 6 |
g/cm³ | ||
粘度 viscosity |
|||
25℃ 25℃ 6 |
Pa·s | ||
25℃ 25℃ 5 |
Pa·s | ||
25℃ 25℃ 4 |
Pa·s | ||
储存稳定性 storage stability |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,25℃ Shaw's D, 25 ℃ |
|||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
弯曲模量 Bending modulus |
MPa | ||
弯曲强度 bending strength |
MPa |
备注 |
---|
2、Component A |
3、Component B |
4、Part A |
5、Mixed |
6、Part B |
【新闻资讯】查看全部
从加息到中美贸易战 三月份PE市场暗流涌动
2018-03-28 2018年3月份,市场并没有迎来需求的小阳春,聚乙烯行情低迷下滑,成交始终疲软,高库存压力一直没有得到缓解。3月份美联储加息兑现,符合市场预期,而宏观面的焦点集中在中美贸易大战上。美国总统特朗普宣布,将对中国价值高达500亿美元(约合人民币3165亿元)的商品征收惩罚性关税。中国商务部公布针对美国进口钢铁和铝产品232措施的中止减让产品清单,拟对约30亿美元自美进口商品加征关税。 有机构解读中美贸易为就业岗位的竞争,并预计若中美同时设置30%关税和非关税混合贸易战,中国的制 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |