牌号简介 About |
---|
EP158N是一种通用尼龙66树脂。该树脂具有高强度、高韧性、高冲击性、良好的流动性和表面润滑性、耐磨性等工程性能的良好平衡组合。典型应用EP158N特别适用于要求高的注塑流动性能和低温性能以及一般用途。终端主要应用于机械、电子、电气、仪表、汽车零部件、铁路、家电、通讯、电缆扎带、精密工程产品等,也可用于生产医疗设备、体育用品、日用品等。 EP158N is a general purpose Nylon 66 resin. This resin offers a well-balanced combination of engineering properties characterized by high strength; good toughness; high impact; good flow and surface lubricity; abrasion resistance. Typical Applications EP158N is especially suitable for demanding injection molding flow properties and low temperature perforinance plus general purpose. Terminal applications mainly in machinery, electronics, electrical, instrumentation, automotive components, railway, home appliances, communications, cable ties and precision engineering products, etc., EP158N also can be used for the production of medical equipment, sporting goods, daily necessities and so on. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
275℃,2.16kg 275℃,2.16kg |
86 | g/10min | ISO 1133 |
含水量 water content |
< 2500 | ppm | 内部方法 |
颗粒大小 Particle size |
1.40 到 2.00 | g/100 pellets | 内部方法 |
相对粘度 Relative viscosity |
2.52 到 2.62 | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 3 |
74.1 | MPa | ISO 527-2 |
拉伸应变 Tensile strain 3 |
|||
断裂 fracture 3 |
% | ISO 527-2 | |
弯曲模量 Bending modulus 3 |
MPa | ISO 178 | |
弯曲强度 bending strength 3 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength 3 |
|||
23℃ 23℃ 3 |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 3 |
|||
0.45 MPa,退火 0.45 MPa, annealed |
℃ | ISO 75-2/B | |
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp 3 |
|||
B120 B120 3 |
℃ | ISO 306/B120 | |
熔融峰值温度 Melting peak temperature 4 |
℃ | ASTM D3418 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level 3 |
UL 94 | ||
1.00 mm 1.00 mm |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
3.00 mm 3.00 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 48h/23°C/50%RH |
3 10°C/min |
【新闻资讯】查看全部
科思创聚氨酯的使用将促风电叶片推翻性变革
2017-11-15 风电行业正进入精益化时代。每一个细节的提升,对于度电成本下降的意义都不可小觑。风机叶片材料,这一易被忽视的细节,竟也蕴藏着提升发电量、降低风机造价的大文章。 去年,高性能聚合物材料供应商科思创联合行业伙伴在中国研制成功全球第一支1.5MW新型高性能聚氨酯树脂体系风机叶片,这意味着在叶片材料上用聚氨酯代替传统的环氧树脂成为可能。继1.5MW聚氨酯叶片之后,目前,科思创正试制更大容量风机的聚氨酯叶片,推动聚氨酯风机叶片早日实现商业化应用。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |