牌号简介 About |
---|
Tecator是一种高性能可熔加工的聚酰胺酰亚胺,在500°F以上的温度环境中保持其优异的机械和磨损性能。TECATOR™ GF30(XP142T)是一种30%玻璃填充级压缩成型,具有优异的刚度和尺寸稳定性。它有各种各样的定制管,环,杆和板尺寸。Tecator(PAI)典型应用:泵零件、气门座、活塞环、密封圈、发动机-变速器零件和轴承保持架。用于半导体工业?烧伤?测试插座,嵌套,底盘和其他应用,如焊接喷嘴头。 TECATOR is a high performance melt processable polyamide-imide that maintains its excellent mechanical and wear properties in temperature environments exceeding 500°F. TECATOR GF30 (XP142T) is a 30% glass filled grade, compression molded with superior stiffness and dimensional stability. It is available in a wide variety of custom tube, ring, rod and plate sizes. TECATOR™(PAI) typical applications: Pump parts, valve seats, piston rings, seal rings, engine transmission parts and bearing cages. For the semiconductor industry it is used for "burn in" test sockets, nests, chassis and other applications such as welding nozzle tips. Excellent weather and gamma radiation resistance Outstanding bearing and wear properties High strength and stiffness Excellent electrical values Good chemical resistance Maintains a high proportion of mechanical properties over a broad temperature spectrum - cryogenic to 500°F. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.58 | g/cm³ | ASTM D792 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
40 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
连续使用温度 Continuous use temperature |
260 | ℃ | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
3.8E-5 | 1/℃ | ASTM D696 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
18 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 | ||
20.0 GHz 20.0 GHz |
ASTM D150 | ||
30.0 GHz 30.0 GHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 | ||
20 GHz 20 GHz |
ASTM D150 | ||
30 GHz 30 GHz |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
阿科玛对南非Permoseal公司的收购顺利完成
2022-07-06 2022年7月1日,阿科玛完成了对南非Permoseal公司的收购,该公司是DIY、包装和建筑领域粘合剂解决方案的领导者。Permoseal的知名品牌将补充Bostik波士胶在该地区的产品组合,并加强其在南 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |