牌号简介 About |
---|
注射成型、充气成型和板材挤压等级。与GPPS(通用聚苯乙烯)或SC*混合,用于具有良好平衡性能和良好热特性的产品。它以颗粒形式提供。与gpps混合,用于psp*层压板。与SC混合,用于收缩膜和其他产品。*PS Japan Corp.的苯乙烯共聚物的折射率类似于Asaflex™ 840,因此,混合后的板材透明度明显高于任何GPP。 Injection molding, inflation molding, and sheet extrusion grade. Blended with GPPS (general-purpose polystyrene) or SC*, for products with well-balanced performance characteristics and good thermal characteristics. It is supplied in pellet form. In blends with GPPS, for PSP* laminate films. In blends with SC, for shrink films and other products. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 840 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS . |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.02 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
7.0 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
0.20 到 0.80 | % | |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.10 | % | ISO 62 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
完全断裂 Complete fracture |
2.0 | kJ/m² | ISO 179 |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
|||
2000 µm 2000 µm |
% | ISO 3537 | |
雾度 Haze |
|||
2000 µm 2000 µm |
% | ISO 3537 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 868 | ||
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ISO 2039-2 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/5 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/5 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
PVC注塑工艺,你晓得多少?
2017-11-27 PVC料因为价廉,与生俱来具备防炎性质,而且强硬坚固,抗化学能力佳,收缩率为0.2-0.6%,产品在电器、机械、建筑、日用品、玩具、包装上应用日益广泛,针对PVC料的特性,分析产品注塑工艺如下: 一、PVC料的特性 PVC热安定性不良,成型温度与分解温度接近,流动性不佳,外观容易形成不良缺陷,PVC料耐热性不佳,最易烧焦、产生酸性气体进而腐蚀模具,加工时可加塑化剂增加其流动性,一般须加添加剂使用,其强度、电器绝缘性、耐药品性 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |