牌号简介 About |
---|
Kraton D1102 J是一种透明的线性嵌段共聚物,以苯乙烯和丁二烯为基础,结合质量为30%的苯乙烯。它是从日本以物理形式供应的,在以下等级命名法中概述:D1102 JS-以多孔颗粒形式供应,颗粒上撒有无定形二氧化硅D1102 JSZ-以多孔颗粒形式供应,颗粒上撒有无定形二氧化硅Kraton D1102 J,用作配制粘合剂、密封剂和涂层的成分。它也可以用作沥青和聚合物的改性剂。 Kraton D1102 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Japan in the physical form(s) outlined in the following grade nomenclature D1102 JS - supplied as porous pellets dusted with amorphous silica D1102 JSZ - supplied as porous pellets dusted with amorphous silica Kraton D1102 J is used as an ingredient in formulating adhesives, sealants, and coatings. It may also find use as a modifier of bitumen and polymers. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.940 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
6.0 | g/10min | ISO 1133 |
结合苯乙烯 Combined with styrene |
30.0 | % | |
灰份含量 Ash Content |
< 1.0 | % | ISO 247 |
挥发物 Volatiles |
< 1.0 | % | 内部方法 |
溶液粘度 Solution viscosity |
|||
25%甲苯溶液,25℃ 25% toluene solution, 25 ℃ |
Pa·s | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,30 秒 Shore A, 30 seconds |
ISO 7619 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 37 | |
300% 应变 300% strain |
MPa | ISO 37 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 37 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
宝理塑料公司将烯烃树脂归入聚合物投资组合
2018-04-02 全球热塑性塑料供应商宝理塑料(东京)宣布,其子公司泰科纳先进聚合物公司(佛罗伦萨,肯塔基州)于4月1日起并入美国宝理塑料公司(法明顿山)。 此次合并将为宝理塑料美国泰科纳现有的聚甲醛(缩醛),聚对苯二甲酸丁二醇酯(PBT)和聚苯硫醚(PPS)工程聚合物产品组合添加环烯烃共聚物(COC)树脂。 合并后将总部设于美国宝理塑料美国公司位于法明顿山的办事处。 今天发布的消息中指出,十多年来,宝理塑料持有泰科纳先进聚合物公司(TAP GmbH;德国法兰克福)的所有权。 并且指出合并将 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |