牌号简介 About |
---|
PBT/ASA合金30%玻璃纤维增强。良好的流动性,良好的表面形貌,良好的机械和热性能组合,良好的尺寸稳定性。可供选择:所有颜色,热稳定(H),释放剂(W)。 PBT/ASA alloy 30% glass fibres reinforced. Good flow, excellent surface aspect, good combination of mechanical and thermal properties, good dimensional stability. Available: all colours, heat stabilized (H), release agent (W). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.43 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
250℃,2.16kg 250℃,2.16kg |
5.0 | g/10min | ASTM D1238,ISO 1133 |
收缩率 Shrinkage rate |
内部方法 | ||
TD TD |
0.30 到 0.50 | % | 内部方法 |
MD MD |
0.20 到 0.40 | % | 内部方法 |
吸水率 Water absorption rate |
ISO 62 | ||
23℃,24hr 23℃,24hr |
0.050 | % | ISO 62 |
饱和,23℃ Saturation, 23 ℃ |
% | ISO 62 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus 2 |
MPa | ISO 178 | |
弯曲强度 bending strength 2 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature 3 |
|||
1.8 MPa,未退火 1.8 MPa, unannealed 3 |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306 | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
ISO 11359-2 | ||
MD MD |
1/℃ | ISO 11359-2 | |
TD TD |
1/℃ | ISO 11359-2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
|||
2.0 mm 2.0 mm |
℃ | IEC 60695-2-12 | |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0,039 in/min |
3 120°C/hr |
【新闻资讯】查看全部
热烈欢迎贵州省天柱县党政考察团莅临鸿志新材招商考察
2021-04-26 搜料网资讯: 2021年4月23日上午,贵州省天柱县委书记陆再义率天柱县党政考察团莅临我司进行招商考察。就钡产业投资项目的发展情况与前景与我司进行深入探讨。天柱县委副书记暨县 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |