| 牌号简介 About |
|---|
| Eastman Neostar弹性体FN005是一种坚硬、透明、耐用的通用级共聚酯醚。它设计用于型材和汽车市场，但也用于需要韧性和抗弯曲裂纹的包装和管道应用。Eastman Neostar弹性体FN005可用于注塑和铸膜或管材挤出应用，也可用于在恶劣环境中要求强度、耐久性和抗穿刺性的任何应用。这种共聚酯结合了韧性，透明度和灵活性，而不添加增塑剂。Eastman Neostar弹性体FN005因其非卤化材料成分而被视为环境首选。本产品的目标固有粘度为1.05。本产品经银级认证。摇篮到摇篮认证标志是一个注册的认证标志，根据McDonough Braungart Design Chemistry（MBDC）的许可使用。MBDC是一家全球可持续发展咨询和产品认证公司。从摇篮到摇篮的框架超越了减少商业的负面影响（“生态效率”）的传统目标，转向了增加其正面影响（“生态效率”）的新范式。在其核心，从摇篮到摇篮的设计将自然“生物代谢”的安全和生产过程视为开发工业材料“技术代谢”流程的模型。产品成分可作为生物和技术营养素在这些代谢中持续回收和再利用。有关MBDC的更多信息，以及获得伊斯曼共聚酯的可打印证书，请访问www.mbdc.com。在C2C认证产品中选择公司名称下的Eastman Chemical Company，以显示我们的产品列表。 Eastman Neostar™ Elastomer FN005 is a tough, clear, durable, general purpose grade copolyester ether. It was designed for use in the profile and automotive markets, but is also used in packaging and tubing applications where toughness and flex-crack resistance are required. Eastman Neostar™ Elastomer FN005 can be used in injection molding and cast film or tubing extrusion applications or in any application that demands strength, durability, and puncture resistance in harsh environments. This copolyester combines toughness, clarity, and flexibility without the addition of plasticizers. Eastman Neostar™ Elastomer FN005 is considered environmentally preferred because of its non-halogenated material composition. The target inherent viscosity of this product is 1.05. This product has been CRADLE TO CRADLE CERTIFIED Silver. The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products. |
产品描述 Product Description
用途：汽车领域的应用;包装;型材;通用;管件;
颜色：清晰/透明
加工条件：注射成型 Injection Molding
性能特点： 无卤; 机械强度好; 尺寸稳定性好; 机械强度好-撕裂; 经久耐用; 耐化学性; 耐高温; 透光性好; 韧性好; 抗穿孔性; Good Rigidity,Good Clarity,Good flexibility,Good Dimensional Stability,Halogen free,High Heat Resistance,Good tear strength,Durability,Solvent resistance,Puncture Resistant
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.13 | g/cm³ | ASTM D792 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
230℃，2.16kg 230℃，2.16kg |
20 | g/10min | ASTM D1238 |
|
吸水率 Water absorption rate |
|||
|
23℃，24hr 23℃，24hr |
0.35 | % | ASTM D570 |
|
固有粘度 Intrinsic viscosity 2 |
|||
|
23℃ 23℃ 2 |
1.1 | 内部方法 | |
|
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
薄膜厚度 film thickness |
|||
|
测试 test |
130 | µm | |
|
割线模量 Secant modulus |
ASTM D882 | ||
|
正切，MD：130 µm Tangent, MD: 130 µ m |
MPa | ASTM D882 | |
|
正切，TD：130 µm Tangent, TD: 130 µ m |
MPa | ASTM D882 | |
|
拉伸强度 tensile strength |
ASTM D882 | ||
|
MD，屈服，130 µm MD, yield, 130 µ m |
MPa | ASTM D882 | |
|
TD，屈服，130 µm TD, yield, 130 µ m |
MPa | ASTM D882 | |
|
MD，断裂，130 µm MD, fracture, 130 µ m |
MPa | ASTM D882 | |
|
TD，断裂，130 µm TD, fracture, 130 µ m |
MPa | ASTM D882 | |
|
拉伸应变 Tensile strain |
ASTM D882 | ||
|
MD，屈服，130 µm MD, yield, 130 µ m |
% | ASTM D882 | |
|
TD，屈服，130 µm TD, yield, 130 µ m |
% | ASTM D882 | |
|
MD，断裂，130 µm MD, fracture, 130 µ m |
% | ASTM D882 | |
|
TD，断裂，130 µm TD, fracture, 130 µ m |
% | ASTM D882 | |
|
透氧率 Oxygen permeability |
|||
|
30℃，130 µm 30℃，130 µm |
cm³/m²/24 hr | ASTM D1434 | |
|
水蒸气透过性 Water vapor permeability 5 |
g/m²/24 hr | ASTM F372 | |
|
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
卡-伯模量 Kappa's modulus |
ASTM D1043 | ||
|
-70℃ -70℃ |
MPa | ASTM D1043 | |
|
-28℃ -28℃ |
MPa | ASTM D1043 | |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
|
-40℃ -40℃ |
J/m | ASTM D256 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
|
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
|
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 6 | |
|
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 | |
|
结晶峰温度 Crystallization peak temperature |
|||
|
DSC DSC |
℃ | DSC | |
|
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
|
MD：23℃ MD：23℃ |
1/℃ | ASTM D696 | |
|
比热 specific heat |
DSC | ||
|
25℃ 25℃ 7 |
J/kg/℃ | DSC | |
|
100℃ 100℃ 7 |
J/kg/℃ | DSC | |
|
150℃ 150℃ 7 |
J/kg/℃ | DSC | |
|
175℃ 175℃ 7 |
J/kg/℃ | DSC | |
|
200℃ 200℃ 8 |
J/kg/℃ | DSC | |
|
225℃ 225℃ 9 |
J/kg/℃ | DSC | |
|
导热系数 Thermal conductivity coefficient |
|||
|
23℃ 23℃ |
W/m/K | ASTM C177 | |
|
融合热量 Fusion heat |
|||
|
23℃ 23℃ |
kJ/kg | ASTM E793 | |
|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
撕裂强度 tear strength |
|||
|
23℃ 23℃ |
N | ASTM D1004 | |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
ASTM D2240 | ||
|
邵氏 A，23℃ Shore A, 23 ℃ |
ASTM D2240 | ||
|
邵氏 D，23℃ Shore D, 23 ℃ |
ASTM D2240 | ||
|
拉伸模量 Tensile modulus |
|||
|
23℃ 23℃ |
MPa | ASTM D638 | |
|
拉伸强度 tensile strength |
ASTM D638 | ||
|
屈服，23℃，3 mm，注塑成型 Yield, 23 ℃, 3 mm, injection molding 3 |
MPa | ASTM D638 | |
|
断裂，23℃，2 mm Fracture, 23 ℃, 2 mm 4 |
MPa | ASTM D638 | |
|
拉伸应变 Tensile strain |
ASTM D638 | ||
|
屈服，23℃ Yield, 23 ℃ |
% | ASTM D638 | |
|
断裂，23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
|
弯曲模量 Bending modulus |
|||
|
23℃ 23℃ |
MPa | ASTM D790 | |
|
摩擦系数 friction coefficient 5 |
ASTM D1894 | ||
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 EMN-A-AC-G-V-1 |
| 3 类型 1, 20 in/min |
| 4 类型 4, 20 in/min |
| 5 0.13 mm |
| 6 压 力1 (10N) |
| 7 Solid |
| 8 Transition, apparent specific heat, including the effects of the heat of fusion. |
| 9 Melt |
|
【新闻资讯】查看全部 
SABIC捐赠逾500万元物资驰援上海抗击疫情
2022-05-10 近日，全球知名的多元化化工企业沙特基础工业公司（SABIC）宣布，将分批捐赠总价值逾500万元的防护用品和生活物资，定向用于支持上海的新冠隔离方舱收治点与医院的病患、医护人 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付