公司信息及水印
| 牌号简介 About |
|---|
| AvaSpire AV -630是未增强聚芳醚酮(PAEK),用来替代低流动性PEEK(聚醚醚酮),用于超薄膜的挤出。厚度低至0.2密耳(5微米)的薄膜可以通过常规热塑性塑料薄膜挤出设备用AV -630 成功地熔融挤出。 AV-630薄膜与相应的PEEK薄膜相比具有一定的性能优势,包括更好的韧度和延展性、温度高于150 ℃时依然保持较高的机械完整性、能更好地适应粘合剂、更耐火焰传播。超薄膜(厚度 <15微米)也表现出更好的韧度,在相同厚度条件下,手感比PEEK薄膜光滑。 用AV -630生产的亚密耳厚度薄膜可广泛用于各种工业领域。常规应用包括电容器、电绝缘性、柔性电路基板、特种层压板、复合材料薄膜层、防潮阻隔、衬里和航空航天薄膜,如隔热隔音毯套袋材料。 - 本色: AvaSpire AV-630 NT AvaSpire® AV-630 is an unreinforced polyaryletherketone (PAEK) developed as an alternative to low melt flow PEEK for the extrusion of ultra-thin films. Films with thicknesses as low as 0.2 mils (5 microns) can be successfully melt extruded out of AV-630 using conventional thermoplastics film extrusion equipment. Films of AV-630 offer certain performance advantages over comparable PEEK film. These include improved toughness and ductility, a higher retention of mechanical integrity at temperatures above 150°C, better acceptance of adhesives and improved flame propagation resistance properties. Ultra-thin films (<15 microns thick) also exhibit a more flexible, less crinkly feel than that of PEEK films at comparable thicknesses. Sub-mil thick films produced from AV-630 can be utilized in a wide range of industrial applications. Typical applications include capacitors, electrical insulation, flexible circuitry substrates, composite film layers, specialty laminates, moisture barriers, liners and aerospace films, such a thermal acoustical insulation blanket bagging materials. Natural: AvaSpire® AV-630 NT |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
1.30 | g/cm³ | ASTM D792 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
400℃,2.16kg 400℃,2.16kg |
7.0 | g/10min | ASTM D1238 |
|
吸水率 Water Absorption |
|||
|
24hr 24hr |
0.20 | % | ASTM D570 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Izod Notched Impact strength |
注册或登录后
所有资料免费
|
||
|
-- -- |
注册或登录后
所有资料免费
|
J/m | ASTM D256 |
|
-- -- |
注册或登录后
所有资料免费
|
kJ/m² | ISO 180 |
|
悬臂梁无缺口冲击强度 Izod Unnotched Impact strength |
注册或登录后
所有资料免费
|
ASTM D4812 , ISO 180 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 HDT 3 |
注册或登录后
所有资料免费
|
||
|
1.8 MPa,退火,3.2 mm 1.8 MPa, annealed, 3.2 mm 3 |
注册或登录后
所有资料免费
|
℃ | ASTM D648 |
|
玻璃化转变温度 Glass transition temperature |
注册或登录后
所有资料免费
|
℃ | ASTM D3418 |
|
熔融峰值温度 Melting peak temperature |
注册或登录后
所有资料免费
|
℃ | ASTM D3418 |
|
比热 specific heat |
注册或登录后
所有资料免费
|
DSC | |
|
50℃ 50℃ |
注册或登录后
所有资料免费
|
J/kg/℃ | DSC |
|
200℃ 200℃ |
注册或登录后
所有资料免费
|
J/kg/℃ | DSC |
|
导热系数 Thermal Conductivity |
注册或登录后
所有资料免费
|
W/m/K | ASTM E1530 |
|
电气性能 ELECTRICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
表面电阻率 Surface resistivity |
注册或登录后
所有资料免费
|
ohms | ASTM D257 |
|
体积电阻率 Volume resistivity |
注册或登录后
所有资料免费
|
ohms·cm | ASTM D257 |
|
介电强度 Dielectric strength |
注册或登录后
所有资料免费
|
||
|
0.06 mm,非晶膜 0.06 mm, amorphous film |
注册或登录后
所有资料免费
|
kV/mm | ASTM D149 |
|
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
极限氧指数 Oxygen Index |
注册或登录后
所有资料免费
|
% | ASTM D2863 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
洛氏硬度 Rockwell hardness |
注册或登录后
所有资料免费
|
||
|
M 级 M-level |
注册或登录后
所有资料免费
|
ASTM D785 | |
|
拉伸模量 Tensile modulus |
注册或登录后
所有资料免费
|
||
|
-- -- 2 |
注册或登录后
所有资料免费
|
MPa | ASTM D638 |
|
-- -- |
注册或登录后
所有资料免费
|
MPa | ISO 527-2/1A/1 |
|
拉伸强度 tensile strength |
注册或登录后
所有资料免费
|
||
|
屈服 yield |
注册或登录后
所有资料免费
|
MPa | ISO 527-2/1A/50 |
|
-- -- 2 |
注册或登录后
所有资料免费
|
MPa | ASTM D638 |
|
拉伸应变 Tensile strain |
注册或登录后
所有资料免费
|
||
|
屈服 yield 2 |
注册或登录后
所有资料免费
|
% | ASTM D638 |
|
屈服 yield |
注册或登录后
所有资料免费
|
% | ISO 527-2/1A/50 |
|
断裂 fracture 2 |
注册或登录后
所有资料免费
|
% | ASTM D638 |
|
断裂 fracture |
注册或登录后
所有资料免费
|
% | ISO 527-2/1A/50 |
|
弯曲模量 Flexural Modulus |
注册或登录后
所有资料免费
|
||
|
-- -- |
注册或登录后
所有资料免费
|
MPa | ASTM D790 |
|
-- -- |
注册或登录后
所有资料免费
|
MPa | ISO 178 |
|
弯曲强度 Flexural Strength |
注册或登录后
所有资料免费
|
||
|
-- -- |
注册或登录后
所有资料免费
|
MPa | ASTM D790 |
|
-- -- |
注册或登录后
所有资料免费
|
MPa | ISO 178 |
|
压缩强度 compressive strength |
注册或登录后
所有资料免费
|
MPa | ASTM D695 |
|
剪切强度 shear strength |
注册或登录后
所有资料免费
|
MPa | ASTM D732 |
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
| 2 2.0 in/min |
| 3 200°C,2小时 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |















支付宝
微信支付