牌号简介 About |
---|
Veradel Pesu以前的市场名称是Gafone Pesu Veradel® 3600聚醚砜(Pesu),是一种非常高的熔融流动性、透明等级,具有较高的热变形温度、良好的韧性和尺寸稳定性,以及耐蒸汽、沸水和矿物酸。其他理想的性能包括热稳定性、抗蠕变和固有的阻燃性。Veradel® 3600建议用于配制,尤其是玻璃或碳纤维增强化合物。它符合FDA标准,因此被批准直接接触食品。其他三个等级可供选择:Veradel 3200、可通过挤压或注射成型加工的低熔体流动等级和Veradel 3300、建议用于通用注射成型的中等熔体流动等级和Veradel 3400、设计用于容易成型薄壁或长流长零件的高熔体流动等级。 Veradel® 3600 polyethersulfone (PESU) is a very high melt flow, transparent grade that offers high heat deflection temperatures, excellent toughness and dimensional stability, and resistance to steam, boiling water and mineral acids. Other desirable properties include thermal stability, creep resistance and inherent flame resistance. Veradel® 3600 is suggested for compounding, especially of glass or carbon fiber reinforced compounds. It is FDA compliant and is therefore approved for direct food contact. Three other grades are available: Veradel® 3200, a low melt flow grade that can be processed by extrusion or injection molding and Veradel® 3300, a medium melt flow grade suggested for general purpose injection molding and Veradel® 3400, a high melt flow grade designed for easy molding of parts with thin walls or long flow lengths. Veradel® PESU was formerly marketed as Gafone™ PESU. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.37 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
380℃,2.16kg 380℃,2.16kg |
75 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
0.60 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
30days 30days |
1.9 | % | ASTM D570 |
24hr 24hr |
0.50 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火,注塑 1.8 MPa, unannealed, injection molded |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level 3 |
|||
1.50 mm 1.50 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 这些可燃性等级不代表这些材料或任何其他材料在实际着火灾情况下的危险性。 |
【新闻资讯】查看全部
9月份原煤生产略有下降,油气电均保持增长
2021-10-18 搜料网资讯: 国家统计局18日发布数据,9月份,规模以上工业主要能源产品中,除原煤生产略有下降外,油、气、电均保持增长。以2019年9月份为基期,原煤生产两年平均增速下降,原 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |