牌号简介 About |
---|
Moplen RP5005是一种天然的、有核的聚丙烯无规共聚物,具有较高的挤出熔融粘度。该产品具有很高的热稳定性和萃取稳定性。它不适用于医疗和制药应用。Moplen RP5005树脂符合21 CFR 177.1520联邦法规中关于食品接触的FDA要求。这是一个发展阶段,配方和规格的变化是可能的。信息在书写时有效。我们建议客户随时与我们核对并确认最新的报表。 Moplen RP5005 is a natural, nucleated polypropylene random copolymer with high melt viscosity for extrusion. The product has a high heat and extraction stability. It is not intended for medical and pharmaceutical applications. Moplen RP5005 resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. This is a developmental grade, changes in formulation and specification are possible. The information is valid at the time of writing. We suggest customers to check and confirm with us the most updated statements from time to time. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ISO 1183 , ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
ASTM D1238 , ISO 1133 | ||
230℃,2.16kg 230℃,2.16kg |
0.30 | g/10min | ASTM D1238,ISO 1133 |
230℃,5.0kg 230℃,5.0kg |
1.3 | g/10min | ASTM D1238,ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
800 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
26.5 | MPa | ASTM D638 |
屈服,注塑成型 Yield, injection molding |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ASTM D638 , ISO 527-2 | |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
-20℃,注塑成型 -20 ℃, injection molding |
kJ/m² | ISO 179/1eU | |
0℃,注塑成型 0 ℃, injection molding |
ISO 179/1eU | ||
23℃,注塑成型 23 ℃, injection molding |
ISO 179/1eU | ||
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ASTM D1525 | |
-- -- |
℃ | ISO 306 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
塑料模具之模坯锻造知识讲解
2016-07-05 1、模具零件锻造的目的 模具零件坯料准备时锻造的目的有两个: (1)获得一定的几何形状; (2)改善材料的组织性能和加工性能。 模具中一般的结构件(如固定板、拉料板等)以第一目的为主,而主要的工作零件(如凸模、凹模等)则两项目的兼有。通过锻造获得模块坯料几何形状的方法,其灵活性极强。基本可满足模块坯料规格和尺寸多样性的要求,具有节省材料、缩短工时等优点。 对于模具中的主要零件,由于其热处理、质量和使用寿命等方面 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |