牌号简介 About |
---|
CONAPOXY® FR-1830是一种环境固化、双组分、低粘度、阻燃环氧灌封、铸造和涂层系统,具有优异的处理性能。CONAPOXY® FR-1830包含一种非研磨填料,以减少机器计量/分配设备上的磨损。CONAPOXY® FR-1830被UL 94V-0认可,符合RoHS标准。使用CONAPOXY® FR-1830生产的产品可以装运到欧盟,但未经固化的A部分和B部分的装运受到限制。 CONAPOXY FR-1830 is a ambient cure, two-component, low viscosity, flame retardant epoxy potting, casting, and coating system with excellent handling properties. CONAPOXY FR-1830 contains a non-abrasive filler to reduce wear on machine metering/dispensing equipment. CONAPOXY FR-1830 is recognized to UL 94V-0 and is RoHS compliant. Products produced using CONAPOXY FR-1830 can be shipped into the European Union, however shipment into the EU of uncured part A and part B is restricted. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
0.965 | g/cm³ | |
-- -- 3 |
1.59 | g/cm³ | |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.34 | % | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
2.0E+15 | ohms | |
体积电阻率 Volume resistivity |
|||
25 ℃ 25 ℃ |
6.9E+14 | ohms·cm | |
介电强度 Dielectric strength |
kV/mm | ||
介电常数 Dielectric constant |
|||
25 ℃,1 kHz 25 ℃,1 kHz |
|||
耗散因数 Dissipation factor |
|||
25℃,1 kHz 25℃,1 kHz |
|||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
4.8 mm 4.8 mm |
UL 94 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Linear Shrinkage Linear Shrinkage |
% | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
拉伸强度 tensile strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Hardener |
3 Resin |
【新闻资讯】查看全部
SME:96%的专业医护人员都在运用3D打印
2018-03-02 在SME发布的一份报告中,96%的专业医护人员都在使用3D打印,例如打印医疗模型、假肢、植入物和手术指南等。预计到2018年,医疗3D打印的数量会有所增加。 在报告中,SME医疗增材制造行业专家Lauralyn McDaniel解释说,“这一增长是由于3D打印按需生产的一系列面向患者的益处。医疗保健提供商的首要任务仍然是病人护理。” McDaniel评论道:“重点是通过3D打印促进POC制造的兴起,为患者和医师/医疗机构带来益处,包括更好的治疗结果,以及缩短 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |