牌号简介 About |
---|
旭化成Tuftec™ H1041适用于容易剥离的薄膜应用。它还可以作为各种塑料的改性剂,具有优越的力学性能和熔体流动性平衡。烯烃和苯乙烯树脂改性剂,用于高冲击强度。相容剂。粘合剂和密封剂组件。SEBS成型化合物的基聚合物。 Asahi Kasei Tuftec™ H1041 is good for easy peel film application. It can be also used as a modifier for a variety of plastics with its superior balance of mechanical property and melt flowability. Olefinic and styrenic resins modifier, for high impact strength. Compatibilizer. Adhesives and sealants component. Base polymer of SEBS molding compounds. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.910 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
5.0 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
84 | ISO 7619 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture 2 |
21.6 | MPa | ISO 37 |
300% 应变 300% strain |
3.40 | MPa | ISO 37 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ISO 37 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Styrene/Rubber ratio Styrene/Rubber ratio |
内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1A, 20 in/min |
【新闻资讯】查看全部
【干货】注塑速度的用法及调机注意事项
2020-12-17 搜料网资讯: 注塑速度的比例控制已经被注塑机制造商广泛采用。虽然电脑控制注塑速度分段控制系统早已存在,但由于相关的资料有限,这种机器设置的优势很少得到发挥。本文将系 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |