牌号简介 About |
---|
Epiall® 1961B-1是一种短玻璃纤维和矿物填充环氧树脂模塑料,具有良好的尺寸稳定性、强度性能和电绝缘性能。 Epiall 1961B-1 is a short glass fiber and mineral filled epoxy molding compound with excellent dimensional stability, good strength properties, and good electrical insulation properties. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.90 | g/cm³ | ASTM D792 |
表观密度 Apparent density |
0.90 | g/cm³ | ASTM D1895 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 到 0.40 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
48hr 48hr |
0.20 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
90.0 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ASTM D648-A | |
线性热膨胀系数 Linear coefficient of thermal expansion |
ASTM E831 | ||
MD MD |
1/℃ | ASTM E831 | |
TD TD |
1/℃ | ASTM E831 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength 2 |
ASTM D149 | ||
-- -- 3 |
kV/mm | ASTM D149 | |
-- -- 4 |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 5 |
|||
1 MHz 1 MHz 5 |
ASTM D150 | ||
耗散因数 Dissipation factor 5 |
|||
1 MHz 1 MHz 5 |
ASTM D150 | ||
耐电弧性 Arc resistance |
sec | ASTM D495 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Wet, 60 Hz |
3 方法A(短时间) |
4 方法B(逐步) |
5 Wet |
【新闻资讯】查看全部
轩然大波!快递巨头顺丰遭消保委质疑,1元收费侵害消费者权益?
2021-09-13 搜料网资讯: 近日,浙江省消费者权益保护委员会(简称:浙江消保委)在其官方平台发文,质疑顺丰1元签收确认增值服务,认为此举涉嫌巧立名目收费,侵害消费者权益。 此事引发 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |