牌号简介 About |
---|
未饱和聚酯树脂。主要性能邻苯二甲酸基聚酯优异的机械性能高性能结构层压快速固化无挥发物进化浅色应用车身零件、游艇、底盘、波纹板通用管、钓鱼杆、导管 Un-saturated polyester resin. Principal properties Orthophthalic acid based polyester Excellent mechanical properties High performance constructional lamination Rapid curing with no volatiles evolved Light colour Applications Car body parts, yachts, chassis, corrugated sheet General purpose Pipe, fishing rods, ducts |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
酸值 acid value |
25.00 到 30.00 | mg KOH/g | |
苯乙烯含量 styrene content |
35 到 40 | % | |
颜色 colour |
< 150 | APHA | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
4200 | MPa | |
拉伸强度 tensile strength |
80.0 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
弯曲模量 Bending modulus |
MPa | ||
弯曲强度 bending strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
|||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
放热峰值 exothermic peak |
℃ | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
g/cm³ | ||
粘度 viscosity |
|||
25℃ 25℃ |
Pa·s | ||
固化时间 Curing time |
hr | ||
胶凝时间 Gelation time |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
浅析塑料机械注塑机七大零碎
2017-09-15 注塑机是在塑料加工过程中常用到的塑料机械之一,塑料机械注塑机的结构通常由通常由注射系统、合模系统、液压传动系统、电气控制系统、润滑系统、加热及冷却系统、安全监测系统等组成。 注射系统注射系统的作用 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |