牌号简介 About |
---|
Fluon®ETFE是旭化成玻璃开发的热塑性含氟聚合物。它是由四氟乙烯(C2F4)和乙烯(C2H4)组成的共聚物。Fluon®ETFE是一种平衡的含氟聚合物,具有耐化学性和电性能,与典型的含氟聚合物(如PTFE、PFA和FEP)相容,其机械强度和易塑性均优于ECTFE或PVDF。应用:电缆管壳长丝模制品薄膜 Fluon®ETFE is a thermoplastic fluoropolymer developed by Asahi Glass. It is a copolymer comprising of tetrafluoroethylene (C2F4) and ethylene (C2H4). Fluon®ETFE is a balanced fluoropolymer that has chemical resistance and electrical propertiescomparable to typical fluoropolymers, such as PTFE, PFA and FEP and performs better than ECTFE or PVdF with its improved mechanical strength and very easy mouldability. Applications: Electrical cables Tubes Casing Filament Moulded parts Films |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
无断裂 | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
连续使用温度 Continuous use temperature |
150 | ℃ | |
熔融温度 Melting temperature |
260 | ℃ | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
9.4E-5 | 1/℃ | ASTM D696 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
1.0E+17 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 | ||
耐电弧性 Arc resistance |
sec | ASTM D495 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
摩擦系数 friction coefficient |
|||
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D792 | |
吸水率 Water absorption rate |
|||
平衡 balance |
% | ASTM D570 | |
熔体表观粘度 Apparent viscosity of melt |
Pa·s | ASTM D3835 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
高耐候、流平优、机械性能强的树脂来了!
2022-04-27 选择一款优质的粉末涂料用聚酯树脂产品,相当于从源头端 做到了绿色环保、低碳减排, 能够帮助粉末涂料和下游多个行业带来更好的应用体验。 而在聚酯树脂行业,上海昕特玛化学 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |