牌号简介 About |
---|
未饱和聚酯树脂。主要性能间苯二甲酸基聚酯优异的机械性能良好的耐候性能,当需要最大的耐水性、耐油性和耐化学性时使用,适用于造船、集装箱、船舶纤维缠绕管、钓鱼杆、导管、车身零件的建造。 Un-saturated polyester resin. Principal properties ISOphthalic acid based polyester Excellent mechanical properties Good weathering properties To be used when maximum durability is required Water, Oil & Chemicals resistant Applications Construction of boat, containers, vessels Filament winding Pipe, fishing rods, ducts Car body parts |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
酸值 acid value |
15.00 到 20.00 | mg KOH/g | |
苯乙烯含量 styrene content |
35 到 38 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
4100 | MPa | |
拉伸强度 tensile strength |
86.0 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
4.4 | % | |
弯曲模量 Bending modulus |
MPa | ||
弯曲强度 bending strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
放热峰值 exothermic peak |
℃ | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
g/cm³ | ||
粘度 viscosity |
|||
25℃ 25℃ |
Pa·s | ||
固化时间 Curing time |
hr | ||
胶凝时间 Gelation time |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
POLYSTAR以先进回收技术持续深耕日本市场
2017-11-20 2017年日本国际橡塑展(IPF 2017)于10月24―28日在日本东京幕张举办。在此次IPF展会上,POLYSTAR以其简约高效的回收机体设计辅以先进智能化的核心单元控制技术,持续深耕日本回收市场。 中国基于环境绿化保护政策之需求,逐步实施禁止废塑料进口至中国回收处理,也驱使许多中国内地的回收商转往邻近国家投资发展,包含东南亚及日本等地区,加上回收再生颗粒进出口热络买气之氛围下,对于POLYSTAR推广回收造粒设备于日本及东南亚市场,具备前瞻与极为重要之意义。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |