牌号简介 About |
---|
一种双组分黑色不透明环氧树脂,设计用于半导体器件和组件的光学、医疗和光电封装。它是对EPO-TEK 320的改进,以增加电气绝缘。它也更具粘性和触变性。可用于粘合、密封、灌封和封装。 A two component, black colored and optically opaque epoxy designed for optical, medical, and opto-electronic packaging of semiconductor devices and components. It is a modification of EPO-TEK ® 320 for increased electrical insulation. It is also more viscous and thixotropic. Can be used for adhesion, sealing, potting and encapsulation. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Part B Part B |
0.868 | g/cm³ | |
Part A Part A |
2.42 | g/cm³ | |
颗粒大小 Particle size |
< 20.0 | µm | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
|||
300-2500 nm 300-2500 nm |
% | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
>10 kg,23℃ >10 kg,23℃ |
MPa | ||
工作温度 working temperature |
|||
连续 continuity |
℃ | ||
间歇 intermission |
℃ | ||
储存模量(23℃) Storage modulus (23 ℃) |
GPa | ||
触变指数 Thixotropic index |
|||
加热减量 Heating reduction |
|||
200℃ 200℃ |
% | ||
250℃ 250℃ |
% | ||
300℃ 300℃ |
% | ||
额定值 Rated value |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 5 |
|||
-- -- 6 |
|||
粘度 viscosity 7 |
|||
23℃ 23℃ 7 |
Pa·s | ||
固化时间 Curing time |
|||
70℃ 70℃ |
hr | ||
储存稳定性 storage stability |
min | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
搭接剪切强度 lap shear strength |
|||
23℃ 23℃ |
MPa | ||
相对电容率 Relative permittivity |
|||
1 kHz 1 kHz |
|||
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ||
玻璃化转变温度 Glass transition temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
2.0E-5 | cm/cm/℃ | |
-- -- 4 |
8.2E-5 | cm/cm/℃ | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
|||
23℃ 23℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
3 Below Tg |
4 Above Tg |
5 Part A |
6 Part B |
7 100 rpm |
【新闻资讯】查看全部
马贝首获 “中国绿色产品认证”的地坪安装材料企业
2020-09-25 搜料网资讯:9月,马贝多类别产品荣获中国建材检验认证集团(简称国检集团)颁发的中国绿色产品认证证书。在市场监管总局首批颁布的绿色产品标准清单与认证目录中,部分归属于 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |