牌号简介 About |
---|
它是热塑性弹性体(TPE)系列中的一种黑色的热塑性硫化弹性体(TPV)。这种材 料配方不但具有低摩擦系数,又和TPV以及热固性三元乙丙橡胶(EPDM)有良好的 粘接性能。由于注塑过程中剪切变稀的特性使得该牌号易于加工,表面美观,与挤 出条颜色匹配;表面不会喷霜并且长期老化下可以保留低摩擦性能。山都平121-70 B260 TPV可使用在汽车密封条上复杂的接角注塑和端盖等应用。 A medium hard black thermoplastic vulcanizate (TPV) combining a low coefficient of friction with a good bonding to TPV and EPDM rubber. This grade offers excellent processability due to high shear thinning behavior for injection molding of complex geometries and excellent surface aesthetics providing color harmony with extruded profiles, without surface bleeding nor change of friction after heat aging. Santoprene 121-70B260 TPV has been designed for complex corner molding and end caps of automotive dense extruded weatherseals, either in TPV or in EPDM rubber. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.910 | g/cm³ | ISO 1183 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,15 秒,23℃ Shore A, 15 seconds, 23 ℃ |
68 | ISO 868 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
TD,断裂,23℃ TD, fracture, 23 ℃ |
6.40 | MPa | ASTM D412 |
TD,100% 应变,23℃ TD, 100% strain, 23 ℃ |
2.60 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
TD,断裂,23℃ TD, fracture, 23 ℃ |
520 | % | ASTM D412 |
压缩形变 Compression deformation |
|||
70℃,22 hr 70℃,22 hr |
% | ASTM D395B | |
70℃,22 hr 70℃,22 hr |
% | ISO 815 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
|||
法律声明 Legal Statement |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
备注 |
---|
2. 类型 1 |
3. 类型 A |
【新闻资讯】查看全部
巴斯夫可堆肥生物基聚合物助中国变废为宝
2021-03-20 搜料网资讯: 通过认证的巴斯夫 ecovio?可堆肥生物基聚合物目前应用于国內多个城市和农场,帮助有机垃圾转化为宝贵资源。在CHINAPLAS2016 国际橡塑展上,巴斯夫将带来其在各地开展的可 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |