Cast Nylons PA6 Nyloil-MDX Gray物性表,塑料价格,代理商,黄卡认证,MSDS,ROHS

纯净版物性表

可自定义公司信息及水印

下载中文物性表自定义下载邮件发送

牌号简介 About
只有来自铸造尼龙有限公司的尼龙油提供三个等级的自润滑尼龙轴承材料，以满足您的具体应用。尼龙油是一种内置油润滑的铸造尼龙，与其他塑料和传统轴承材料相比，尼龙油具有优越的机械加工性、性能和耐久性。三种等级的尼龙油可用于最苛刻的应用：大多数轴承应用的原始绿色尼龙油；食品级，与食品直接接触的天然尼龙油-FG，以及比原始尼龙油稍高压缩载荷能力的MoS2填充尼龙油-MDX。与其他轴承材料相比，将润滑油封装在尼龙基体中提供了显著的优势：在润滑困难、不可能或不理想（食物接触）的恶劣环境中，与其他等级的尼龙相比，润滑导致摩擦系数降低25%。应用。吸水率降低可提高尺寸稳定性。像黄铜一样容易加工和加工。即使在最恶劣的操作条件下，机油也不会脱落、变干或排出。在尼龙油的制造过程中，润滑油包完全分散在铸造尼龙基体中，使其成为铸件结构的一个组成部分。灰色尼龙油MDX是由二硫化钼填充料配制而成，除了润滑油外，二硫化钼填充料还能提高铸造聚合物的结晶度。这就产生了一种分子间结构更为一致的轴承材料，在物理性能值范围内分布更窄，同时保持了未填充尼龙油的高级摩擦性能。尺寸稳定性与较高的结晶度，所有nycast产品显示出改善的尺寸稳定性相比，挤压尼龙对应。但是尼龙油比常规等级的浇铸尼龙具有更好的尺寸稳定性：它的油滴填补了聚合物无定形结构中的空隙，从而减少了水被吸收到这些区域的空间。水分吸收图显示，尽管吸收速度较慢，但尼龙油稳定在约2.5%的水分含量-不到其他未填充尼龙的水分含量的一半。 Only NYLOIL from CAST NYLONS LIMITED offers three grades of self-lubricating Nylon bearing material tailored to meet your specific application. A cast nylon with built-in oil lubrication, NYLOIL provides superior machinability, performance, and durability compared to other plastic and traditional bearing materials. Three grades of NYLOIL are available to fit the most demanding applications: original green NYLOIL for most bearing applications; food-grade, Natural NYLOIL-FG for direct contact with food, and MoS2 filled NYLOIL-MDX with slightly higher compressive load capabilities than original NYLOIL. The incorporation of an oil lubricant package into the nylon matrix provides significant advantages over other bearing materials: Lubrication results in 25% lower coefficient of friction than other grades of nylon Performs in harsh environments where lubrication is difficult, impossible or not desirable (food contact) Works successfully in marine applications. Reduced water absorption promotes higher dimensional stability. Works and machines as easily as brass. Oil will not spin out, dry out, or drain out, even under the harshest operating conditions. During NYLOIL's manufacturing process, an oil lubricant package is completely dispersed within the cast nylon matrix, making it an integral part of the casting's structure. Gray NYLOIL-MDX is formulated with Molybdenum Disulfide filler, which promotes higher crystallinity in the cast polymer, in addition to the oil lubricant package. This yields a bearing material with more consistent intermolecular structure and generally a narrower distribution within the range of physical property values, while retaining the advanced friction properties of unfilled NYLOIL. Dimensional Stability With their higher crystallinity, all NYCAST products exhibit improved dimensional stability compared to their extruded nylon counterparts. But NYLOIL provides even better dimensional stability than regular grades of cast nylon: Its oil droplets fill gaps in the amorphous structure of the polymer, allowing less room for water to be absorbed into these areas. The moisture absorption graph shows that despite a slow absorption rate, NYLOIL stabilizes at approximately 2.5% moisture content - less than half the moisture content of other unfilled nylons.

牌号简介 About

只有来自铸造尼龙有限公司的尼龙油提供三个等级的自润滑尼龙轴承材料，以满足您的具体应用。尼龙油是一种内置油润滑的铸造尼龙，与其他塑料和传统轴承材料相比，尼龙油具有优越的机械加工性、性能和耐久性。三种等级的尼龙油可用于最苛刻的应用：大多数轴承应用的原始绿色尼龙油；食品级，与食品直接接触的天然尼龙油-FG，以及比原始尼龙油稍高压缩载荷能力的MoS2填充尼龙油-MDX。与其他轴承材料相比，将润滑油封装在尼龙基体中提供了显著的优势：在润滑困难、不可能或不理想（食物接触）的恶劣环境中，与其他等级的尼龙相比，润滑导致摩擦系数降低25%。应用。吸水率降低可提高尺寸稳定性。像黄铜一样容易加工和加工。即使在最恶劣的操作条件下，机油也不会脱落、变干或排出。在尼龙油的制造过程中，润滑油包完全分散在铸造尼龙基体中，使其成为铸件结构的一个组成部分。灰色尼龙油MDX是由二硫化钼填充料配制而成，除了润滑油外，二硫化钼填充料还能提高铸造聚合物的结晶度。这就产生了一种分子间结构更为一致的轴承材料，在物理性能值范围内分布更窄，同时保持了未填充尼龙油的高级摩擦性能。尺寸稳定性与较高的结晶度，所有nycast产品显示出改善的尺寸稳定性相比，挤压尼龙对应。但是尼龙油比常规等级的浇铸尼龙具有更好的尺寸稳定性：它的油滴填补了聚合物无定形结构中的空隙，从而减少了水被吸收到这些区域的空间。水分吸收图显示，尽管吸收速度较慢，但尼龙油稳定在约2.5%的水分含量-不到其他未填充尼龙的水分含量的一半。 Only NYLOIL from CAST NYLONS LIMITED offers three grades of self-lubricating Nylon bearing material tailored to meet your specific application. A cast nylon with built-in oil lubrication, NYLOIL provides superior machinability, performance, and durability compared to other plastic and traditional bearing materials. Three grades of NYLOIL are available to fit the most demanding applications: original green NYLOIL for most bearing applications; food-grade, Natural NYLOIL-FG for direct contact with food, and MoS2 filled NYLOIL-MDX with slightly higher compressive load capabilities than original NYLOIL. The incorporation of an oil lubricant package into the nylon matrix provides significant advantages over other bearing materials: Lubrication results in 25% lower coefficient of friction than other grades of nylon Performs in harsh environments where lubrication is difficult, impossible or not desirable (food contact) Works successfully in marine applications. Reduced water absorption promotes higher dimensional stability. Works and machines as easily as brass. Oil will not spin out, dry out, or drain out, even under the harshest operating conditions. During NYLOIL's manufacturing process, an oil lubricant package is completely dispersed within the cast nylon matrix, making it an integral part of the casting's structure. Gray NYLOIL-MDX is formulated with Molybdenum Disulfide filler, which promotes higher crystallinity in the cast polymer, in addition to the oil lubricant package. This yields a bearing material with more consistent intermolecular structure and generally a narrower distribution within the range of physical property values, while retaining the advanced friction properties of unfilled NYLOIL. Dimensional Stability With their higher crystallinity, all NYCAST products exhibit improved dimensional stability compared to their extruded nylon counterparts. But NYLOIL provides even better dimensional stability than regular grades of cast nylon: Its oil droplets fill gaps in the amorphous structure of the polymer, allowing less room for water to be absorbed into these areas. The moisture absorption graph shows that despite a slow absorption rate, NYLOIL stabilizes at approximately 2.5% moisture content - less than half the moisture content of other unfilled nylons.

产品描述 Product Description

用途：滑轮;船舶应用;外壳;轴承;阀门/阀门部件;传送机配件;密封件;衬套;滚轴;齿轮;凸轮;车轮;模具;防磨条;

加工条件：浇铸 casting

性能特点： 自润滑; 尺寸稳定性好; 经久耐用; 吸水率低; 高结晶; 润滑性; 食品接触; 低摩擦系数; 可分散; Good Dimensional Stability,Low or no water absorption,Low coefficient of friction,Machinable,Food contact compliance,Self-lubricating,Lubricating,Durability,High crystallization

技术参数 Technical Data
物理性能 PHYSICAL	额定值 Nominal Value	单位 Units	测试方法 Test Method
密度 Density	1.14 到 1.15	g/cm³	ASTM D792
吸水率 Water absorption rate
24hr 24hr	0.40 到 0.60	%
饱和 saturated	4.0 到 5.0	%
冲击性能 IMPACT	额定值 Nominal Value	单位 Units	测试方法 Test Method
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch	75 到 96	J/m	ASTM D256
热性能 THERMAL	额定值 Nominal Value	单位 Units	测试方法 Test Method
热变形温度 Hot deformation temperature
0.45 MPa，未退火 0.45 MPa, unannealed	149 到 204	℃
1.8 MPa，未退火 1.8 MPa, unannealed		℃
熔融温度 Melting temperature		℃
线性热膨胀系数 Linear coefficient of thermal expansion
MD MD		1/℃	ASTM D696
使用温度 Operating temperature
Continuous Continuous		℃
Intermittent Intermittent		℃
电气性能 Electrical performance	额定值 Nominal Value	单位 Units	测试方法 Test Method
介电强度 Dielectric strength		kV/mm	ASTM D149
介电常数 Dielectric constant
60 Hz 60 Hz
1 kHz 1 kHz
1 MHz 1 MHz
补充信息 Supplementary information	额定值 Nominal Value	单位 Units	测试方法 Test Method
限压速度 Pressure limiting speed		psi·fpm
机械性能 MECHANICAL	额定值 Nominal Value	单位 Units	测试方法 Test Method
邵氏硬度 Shore hardness
邵氏 D Shaw's D			ASTM D2240
洛氏硬度 Rockwell hardness
R 级 R-level			ASTM D785
拉伸模量 Tensile modulus		MPa	ASTM D638
拉伸强度 tensile strength		MPa	ASTM D638
拉伸应变 Tensile strain
断裂 fracture		%	ASTM D638
弯曲模量 Bending modulus		MPa	ASTM D790
弯曲强度 bending strength		MPa	ASTM D790
压缩模量 Compression modulus		MPa	ASTM D695
压缩强度 compressive strength
10% 应变 10% strain		MPa	ASTM D695
剪切强度 shear strength		MPa	ASTM D732
摩擦系数 friction coefficient
动态 dynamic			ASTM D1894
负载变形 Load deformation		%	ASTM D621

备注
暂无数据

【新闻资讯】查看全部

沈阳化工前三季度净利润3.23亿元同比增长1309.69%
2021-10-22
搜料网资讯： 10月21日晚间，沈阳化工发布2021年三季报，2021年前三季度，公司实现营业收入80.16亿元，同比增长36.97%；归属于上市公司股东的净利润3.23亿元，同比增长1309.69%；基本每股

【免责声明】

供应商列表
推荐供应商	供应等级	所在地区	网址	联系人	电话	微信
虚位以待	贸易商
虚位以待	代理商
虚位以待	贸易商

电邮一份说明书

发送至：（多个地址，中间以逗号隔开）

备注：

电邮一份说明书

发送至：（多个邮件地址，中间以逗号隔开）

备注：

搜料服务热线

400-6700-720

分享到微信

每月充值前100名会员活动大礼包，更多优惠在等着你哦！

活动说明

Nycast Nyloil-MDX Gray 询价发货，点击联系客服
PA6 \| 美国Cast Nylons
色号 NC 此色号对应颜色本型号/色号暂未建立色号系统，敬请期待！下询价单(非工作时间) 温馨提醒：如指定型号不能换，我们可尽快报价；如接受同等性能国产替代，集团工厂【塑擎实业】可降本按需定制。详询谢工13926159974（电话微信同）

牌号	厂家
类别

价格走势图

电邮一份说明书

发送至：（多个地址，中间以逗号隔开）

备注：

电邮一份说明书

发送至：（多个邮件地址，中间以逗号隔开）

备注：

搜料服务热线

400-6700-720

分享到微信

每月充值前100名会员活动大礼包，更多优惠在等着你哦！

活动说明