牌号简介 About |
---|
己二酸合成酯是API第V类流体。这些脂肪族酯具有相对较高的VIS、优异的低温流动性、良好的溶解性,并且非常适合需要氧化稳定性的高温应用。合成己二酸酯可作为唯一合成基液或添加剂用于汽车、航空和工业润滑油应用,如变速箱和齿轮油、航空发动机油和压缩机油。 SynPrime™ Adipate Esters are API category Group V fluids. These aliphatic esters have relatively high VIs, excellent low-temperature flow properties, good solvency, and are excellent for high temperature applications which require oxidative stability. SynPrime™ Adipate Esters can be used either as sole synthetic basefluids or additives in automotive, aviation and industrial lubricant applications such as transmission and gear fluids, aviation engine oils and compressor oils. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
0.919 到 0.925 | g/cm³ | ASTM D4052 |
Viscosity Index Viscosity Index |
121 | ASTM D2270 | |
含水量 water content |
< 500 | ppm | ASTM D6304 |
酸值 acid value |
< 0.05 | mg KOH/g | ASTM D974 |
外观 exterior |
清洁,干净 | ASTM D2090 | |
颜色 colour 3 |
ASTM D1209 | ||
粘度 - Kinematic Viscosity - Kinematic |
|||
40℃ 40℃ |
cSt | ||
100℃ 100℃ |
cSt | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
浇铸点 Casting point |
℃ | ASTM D97 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
燃点 Ignition point |
℃ | ASTM D92 | |
闪点 flash point |
℃ | ASTM D92 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
|||
25℃ 25℃ |
ASTM D1218 |
备注 |
---|
2. 25/25°C |
3. Pt-Co 等级,最大值 |
【新闻资讯】查看全部
巴斯夫为注塑成型研发新的模仿工具
2018-03-20 巴斯夫提供了一个用于模拟注塑部件应用的新工具。巴斯夫的Ultrasim仿真工具一直在对注塑成型的产品进行纤维填充塑料的各向异性力学行为进行精确计算。如今又增加了一项---纤维增强热塑性塑料的热机械模型,现在可以通过模拟精确预测温度引起的变形。 对客户而言,他们现在可以在组件的实际开发阶段确定可能的缺陷,并在生产阶段之前阻止。新模块考虑了复杂的热机械材料行为,各向异性纤维取向的影响以及组件中的温度分布和变化。 巴斯夫模拟专家Andreas Wonisch表示“ |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |