牌号简介 About |
---|
警告:此材料的状态为“商业:限量发行”。此材料的数据最近尚未验证。在指定此等级之前,请联系RTP公司以获取当前信息。 Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.31 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD:3.2 mm,注塑成型 MD: 3.2 mm, injection molded |
1.2 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
2410 | MPa | ASTM D638 |
拉伸强度 tensile strength |
90.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
10 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
注塑成型 injection molding |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm,注塑成型 3.2mm, injection molded |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
3.2 mm 3.2 mm |
ASTM D4812 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
℃ | ASTM D648 | |
1.8 MPa,未退火,注塑 1.8 MPa, unannealed, injection molded |
℃ | ASTM D648 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
GPM国塑机械推出连续碳纤维增强PPS-UD热塑预浸料单向带生产线
2020-10-21 搜料网资讯: 聚苯硫醚(PPS)作为一种高性能的工程材料具备很多性能上的优势,但是由于技术原因,以前连续碳纤维增强PPS-UD带均需依赖进口。 GPM国塑机械的技术团队潜心研发,突破 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |