牌号简介 About |
---|
一种单组分、触变、电绝缘和热绝缘环氧粘合剂,设计用于将SMD粘合到印刷电路板上。它可用于许多设备的电子组装,包括消费电子产品、手机、电信、医疗、汽车和科学/原始设备制造商。它是EPO-TEK 115-SMT的红色版本。 A single component, thixotropic, electrically and thermally insulating epoxy adhesive designed for bonding SMDs to the PCB. It can be used for electronic assembly in many devices including consumer electronics, cell phone, telecommunications, medical, automotive, and scientific/OEM. It is a red color version of EPO-TEK® 115-SMT. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
< 20.0 | µm | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Degradation Temperature Degradation Temperature |
344 | ℃ | |
Die Shear Strength(>5 kg,23℃) Die Shear Strength(>5 kg,23℃) |
11.7 | MPa | |
工作温度 working temperature |
|||
Continuous Continuous |
℃ | ||
Intermittent Intermittent |
℃ | ||
Storage Modulus(23℃) Storage Modulus(23℃) |
GPa | ||
加热减量 Heating reduction |
|||
200℃ 200℃ |
% | ||
250℃ 250℃ |
% | ||
300℃ 300℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
密度 Density |
g/cm³ | ||
粘度 viscosity 5 |
|||
23℃ 23℃ 5 |
Pa·s | ||
固化时间 Curing time |
|||
150℃ 150℃ |
hr | ||
储存稳定性 storage stability |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
搭接剪切强度 lap shear strength |
|||
23℃ 23℃ |
MPa | ||
相对电容率 Relative permittivity |
|||
1 kHz 1 kHz |
|||
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
4.1E-5 | cm/cm/℃ | |
-- -- 4 |
2.2E-4 | cm/cm/℃ | |
贮藏期限 Storage period |
|||
-40℃ -40℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
3 Below Tg |
4 Above Tg |
5 1 rpm |
【新闻资讯】查看全部
克劳斯玛菲:生产纤维增强塑料部件的低本钱处理方案
2018-02-01 2018年3月6~8日,在法国巴黎举行的JEC World展会的6-F61展位,克劳斯玛菲将展出用于生产纤维增强塑料部件的低成本解决方案,展出重点是基于热塑性和热固性基体材料的新工艺和新应用,它们都是为大批量的生产和开创性的轻量化结构而准备的生产工艺。 湿法模塑第一次完全实现了自动化 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |