牌号简介 About |
---|
针对珠宝模型的直接熔模铸造,开发了适用于DigitalWax J系列立体光刻系统的光敏树脂DC500铸造树脂。DC500铸造树脂允许建造高质量分辨率和光滑表面的详细零件,而不需要任何其他手工修整。DC500铸造树脂的弹性允许您直接在树脂模型中设置石头。DC500铸造树脂是一种很好的细钢丝花纹材料,用橡胶成型方法无法复制细钢丝花纹。特点是表面光滑,分辨率高,精度高,不需要进一步的手工修整。 Photosensitive Resin for DigitalWax® J Series Stereolithography Systems DC500 Casting Resin was specially developed for direct investment casting of jewelry models. DC500 Casting Resin allows the building of detailed parts with high quality resolution and smooth surfaces which do not require any other manual finishing. The elasticity of the DC500 Casting Resin allows you to set the stones directly in the resin model. DC500 Casting Resin is the perfect material for thin wire patterns which are impossible to be replicated using rubber moulding methods. Features Smooth surface High resolution High accuracy No further manual finishing needed |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity 2 |
|||
25℃ 25℃ 2 |
0.4 到 0.6 | Pa·s | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
48 | ||
弯曲模量 Bending modulus |
95.0 | MPa | |
弯曲强度 bending strength |
5.20 | MPa |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Liquid Resin |
【新闻资讯】查看全部
聚丙烯里加点聚乙烯,效果让人意想不到!
2017-11-27 聚乙烯和聚丙烯原料生产工艺比较相似,产品都可以用来做塑料薄膜、注塑产品、塑料管材等,很多情况下我们发现两种原料在性质及用途上有很大的相似性。但事实上,聚丙烯原料和聚乙烯原料在运用上还是有很多不同点的,小编给您来分析聚丙烯和聚乙烯的性能特点,探讨二者不同比例混合后材料性能的差异。 PE和PE性能差异 从耐热角度来分析,聚丙烯的耐热性要高于聚乙烯,通常情况下,聚丙烯的熔融温度比聚乙烯高出约40%-50%,约为160-170℃,所 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |