牌号简介 About |
---|
SABIC® LLDPE R40039EE是一种中密度聚乙烯(MDPE)共聚物。它具有良好的抗应力、抗裂性、刚性、光泽和低翘曲性。树脂含有紫外线稳定剂。建议SABIC LLDPE R4039E在用于旋转成型应用之前进行研磨。典型应用。由于其良好的加工性能和物理性能,SABIC® LLDPE R40039EE通常用于大型工农业储罐、垃圾箱和化学品运输桶的旋转成型。由于良好的机械性能和较低的翘曲,本产品通常用于螺杆封口、盖和家庭用品的注塑成型。紫外线稳定性为最终产品提供了良好的保护。本产品不适用于任何医药/医疗应用,也不得用于任何医药/医疗应用。 SABIC® LLDPE R40039EE is a medium density polyethylene (MDPE) copolymer. It is typically used for its good stress crack resistance, rigidity, gloss and low warpage. The resin contains UV-stabilizer. It is recommended that SABIC® LLDPE R40039E is grinded before use in rotational moulding applications. Typical applications. Because of the good processing performance and physical properties, SABIC® LLDPE R40039EE is typically used for the rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums. Due to the good mechanical properties and low warpage this product is typically used for injection moulding of screw closures, caps and housewares. The UV-stabilization provides good protection for the final product. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.937 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
3.5 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
100%非离子洗涤剂,模压成型,F50 100% non-ionic detergent, molded, F50 |
> 150 | hr | ASTM D1693B |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
< -75.0 | ℃ | ASTM D746 |
维卡软化温度 Vicat Softening Temp |
117 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
MPa | ASTM D638 | |
断裂,模压成型 Fracture, molded |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,模压成型 Fracture, molded |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
上半年清洁能源占比持续提高
2021-07-31 搜料网资讯: 国家统计局近日发布2021年上半年国民经济运行情况。据国家统计局能源司司长胡汉舟介绍,今年上半年我国能源供需延续稳定恢复态势,能源生产稳中有增,能源消费增速 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |