牌号简介 About |
---|
BPD2000E是一种不稳定、清洁的低密度聚乙烯。应用BPD2000E设计用于中/高压(MV/HV)电力电缆绝缘,采用直接过氧化氢注入(DPI)工艺和要求额外清洁的应用。BPD2000E对高压电缆绝缘和电压限制的适用性取决于电缆制造商获得的经验和经过的验证。 BPD2000E is an unstabilised and clean low density polyethylene. Applications BPD2000E is designed for use in Medium/High Voltage (MV/HV) power cables insulation using the direct peroxide injection (DPI) process and applications requesting extra cleanliness. Suitability of BPD2000E for insulation of HV cables and voltage limitation depend on experience acquired and validations undergone by the cable manufacturer. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.923 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
2.0 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
18.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
> 500 | % | ISO 527-2 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
> 1.0E+15 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength 2 |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
50 Hz 50 Hz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
50 Hz 50 Hz |
ASTM D150 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 方法A(短时间) |
【新闻资讯】查看全部
加拿大CGT收购了法国的AlkorDraka Industries和Alkor Medical Tubing
2019-08-28 加拿大General-Tower(CGT)是全球领先的涂层织物和薄膜产品及解决方案供应商,目前已宣布收购法国公司Alkor Draka Industries和Alkor Medical Tubing,这家公司是塑料薄膜配方的专家。 CGT成功收 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |