牌号简介 About |
---|
未催化的乙烯基,高稠度硅胶弹性体
特点:低硬度硅胶、需要添加过氧化物催化剂完成硫化、可通过400目筛网(最小)
*适用于医疗保健的各种制造技术
生产工艺:模塑,压延和挤出 NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). HCRs can be used for extrusion of tubing and profi les (rod or ribbon), in calendared sheeting for die-cutting, or in compression or transfer molded parts such as balloons, gaskets or o-rings. HCRs are clay-like in the uncured state and when cured generally exhibit very high mechanical properties and low modulus. HCRs with a peroxide cure system have a long history in implant applications. The cure mechanism can be vinyl specific or non vinyl specific. Non vinyl specific peroxide catalysts are more commonly used with HCRs than vinyl specific peroxide catalysts. Comments: UNCATALYZED |
技术参数 Technical Data | |||
---|---|---|---|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
后固化时间 Post curing time |
|||
177℃ 177℃ |
2.0 | hr | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Cure System Cure System |
Peroxide | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | |
固化时间 Curing time |
|||
116℃ 116℃ |
0.083 | hr | |
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
35 | ||
拉伸强度 tensile strength |
MPa | ||
200% 应变 200% strain |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
撕裂强度 tear strength |
kN/m |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
中国禁废,撬动了世界废料的处置形式
2018-09-14 自中国对废塑料再利用行业政策收紧之后,已然撬动了世界废料的处理模式。今日各大媒体、协会组织提起《巴塞尔公约》,甚至有些国家提议修正该国际公约,意在拓宽约束内容。不难看出,目前环境污染已经威胁到了越来越多的国家,各国对环境的重视程度也已经超乎以往。 提到《巴塞尔公约》,最近的出现频次较高。金联创先科普下该国家公约。原名为《控制危险废料越境转移及其处置巴塞尔公约》,1989年3月22日联合国环境规划署在瑞士签署的,目前已有186个国家签署了这项公约,中国于1990年3月22日在 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |