牌号简介 About |
---|
EPO-TEK® H20E-LV是一种双组分、100%固体银填充环氧树脂系统,专为微电子和光电应用中的芯片粘结而设计。它是EPO-TEK H20E的低粘度版本,半导体压模环氧树脂。 EPO-TEK® H20E-LV is a two component, 100% solids silver-filled epoxy system designed specifically for chip bonding in microelectronic and optoelectronic applications. It is a low viscosity version of EPO-TEK® H20E, semiconductor die-attach epoxy. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
< 45.0 | µm | |
离子类型 Ionic type |
|||
Cl- Cl- |
102 | ppm | |
K+ K+ |
25 | ppm | |
Na+ Na+ |
98 | ppm | |
NH4+ NH4+ |
320 | ppm | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Degradation Temperature Degradation Temperature |
℃ | TGA | |
Die Shear Strength(>5 kg,23℃) Die Shear Strength(>5 kg,23℃) |
MPa | ||
工作温度 working temperature |
|||
Continuous Continuous |
℃ | ||
Intermittent Intermittent |
℃ | ||
Storage Modulus(23℃) Storage Modulus(23℃) |
GPa | ||
触变指数 Thixotropic index |
|||
加热减量 Heating reduction |
|||
300℃ 300℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 5 |
|||
密度 Density |
|||
Part A Part A |
g/cm³ | ||
Part B Part B |
g/cm³ | ||
粘度 viscosity 7 |
|||
23℃ 23℃ 7 |
Pa·s | ||
固化时间 Curing time |
|||
150℃ 150℃ |
hr | ||
储存稳定性 storage stability |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
搭接剪切强度 lap shear strength |
|||
23℃ 23℃ |
MPa | ||
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
cm/cm/℃ | ||
-- -- 4 |
cm/cm/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
|||
23℃ 23℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
3 Below Tg |
4 Above Tg |
5 Part B |
6 Part A |
7 100 rpm |
【新闻资讯】查看全部
古雷石化乙烯装置裂解炉点火烘炉一次成功
2021-05-30 搜料网资讯: 5月24日,蒸汽裂解装置裂解炉F-003和F-007点火烘炉一次成功,为蒸汽裂解装置投料试车奠定了坚实的基础。 按装置开工方案要求,每台裂解炉烘炉要持续153小时,两台裂解 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |