牌号简介 About |
---|
ARLEN™ AE4200N是一种聚酰胺 6T(尼龙 6T)材料,。 该产品在北美洲有供货,。 ARLEN™ AE4200N的主要特性有: 阻燃/额定火焰 Flame Retardant ARLEN™ AE4200N (Dry) ARLEN™ AE4200N is a Polyamide 6T (Nylon 6T) material. It is available in North America. Important attributes of ARLEN™ AE4200N are: Flame Rated Flame Retardant ARLEN™ AE4200N ARLEN™ AE4200N by Mitsui Chemicals is a flame retardant modified polyamide 6T grade. Possesses high dimensional stability, high melting point, minimum water absorption and high glass transition point (125°C). Exhibits good chemical and heat resistance. Offers high rigidity even in a high-temperature atmosphere such as the inside of an engine room. Is suitable for processing by injection molding. ARLEN™ AE4200N is used in mechanical and structural applications including under the hood parts such as cooling system parts, cylinder head covers, thermostat cases, hydraulic system pistons and oil pump housings. Recommended for light-load tribological application parts of office automation equipment. Complies with UL 94 V0 flame rating. Features: Possesses high dimensional stability, high melting point, minimum water absorption and high glass transition point (125°C). Exhibits good chemical and heat resistance with high rigidity. Flame retardant. Applications: ARLEN™ AE4200N is used in mechanical and structural applications including under the hood parts such as cooling system parts, cylinder head covers, thermostat cases, hydraulic system pistons and oil pump housings. Recommended for light-load tribological application parts of office automation equipment. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.40 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
TD:2.0 mm TD:2.0 mm |
1.0 | % | ASTM D955 |
MD:2.0 mm MD:2.0 mm |
0.80 | % | ASTM D955 |
吸水率 Water absorption rate |
ASTM D570 | ||
23℃,24hr 23℃,24hr |
0.30 | % | ASTM D570 |
100℃,24hr 100℃,24hr |
2.0 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
熔融温度 Melting temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
TD TD |
1/℃ | ASTM D696 | |
MD MD |
1/℃ | ASTM D696 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
2 mm 2 mm |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,2 mm Fracture, 2 mm |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
把握未来塑料趋势!微孔发泡注塑助力轻量化设计!
2021-04-26 搜料网资讯: 轻量化设计是未来塑料加工技术的趋势之一。塑料轻量化不仅有助于节省原料成本,对于汽车、航天航空等产业更意味着产品整体性能和竞争力的提升。 微孔发泡注塑成型 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |