牌号简介 About |
---|
DI-PAK E-4600系列柔性、高强度、50至71邵氏D硬度封装系统。可用阻燃剂(FR),3分钟(-3)凝胶时间,并在黑色或未着色。 DI-PAK E-4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | ASTM D4669 |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.30 | % | ASTM D2566 |
Weight(per cubic inch) Weight(per cubic inch) |
17 | g | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength 2 |
78.8 | kN/m | ASTM D624 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
120 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
ASTM D256 | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
100 kHz 100 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
25℃,100 kHz 25℃,100 kHz |
ASTM D150 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D4878 | |
脱模时间 stripping time |
|||
21℃ 21℃ |
min | ||
胶凝时间 Gelation time 3 |
|||
25℃ 25℃ 3 |
min | ASTM D2971 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
冷热冲击测试 Test Cold and hot shock test |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具 |
3 100 g |
【新闻资讯】查看全部
凭仗塑料4.0在中国完成定制型联网生产
2017-05-16 �C KraussMaffei集团在“塑料4.0”的统称下推进工业4.0在塑料加工领域的实施 �C 为中国企业创造巨大的发展潜力 �C 将在2017中国国际塑料橡胶工业展览会上进行多场现场展示 瞩目焦点:关键词“工业4.0”是指机床、生产过程和 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |