牌号简介 About |
---|
出于库存控制目的,产品名称后面可以跟一个X。标记为FEP CJ 95和FEP CJ 95 X的产品是等效的,本文件中的所有信息都适用于这两者。电线和电缆的典型应用绝缘和护套,在要求高应力抗裂性的应用中。通用和化学加工工业用管道。杜邦特氟隆FEP CJ 95是一种不含添加剂的四氟乙烯和六氟丙烯的熔融加工共聚物,符合ASTM D 2116 I型的要求。它提供了特氟隆氟聚合物树脂的优良性能组合:无老化特性、化学惰性、优异的介电性能。低可燃性、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性和优异的耐候性。作为一种中等分子量的树脂,特氟隆FEP CJ 95的加工速度比许多具有类似高应力抗裂性的FEP等级都要快。应力抗裂性是确定最终使用性能的重要因素。为了确定性能评估,需要对电线和电缆结构进行广泛的测试。经验表明,在树脂薄膜上进行的MIT耐折性或弯曲寿命试验与广泛的电缆试验建立了良好的相关性。MIT的弹性寿命越高,树脂的应力开裂抗力越高。麻省理工学院的测试结果应被视为不同等级树脂比较性能的指南。我们建议,对于涉及重复热循环和弯曲循环的应用,应始终对最终电缆进行特定测试。另请参见杜邦公告“电线和电缆应用的等级选择器”。 For inventory control purposes product name may be followed by an X. Products labeled FEP CJ 95 and FEP CJ 95 X are equivalent and all information in this document is applicable to both. Typical Application Insulation and jacket for Wire and Cable, in applications demanding a high degree of stress crack resistance. Tubes and piping for general and chemical process industry. DuPont Teflon ® FEP CJ 95 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116 type I. It offers the excellent combination of properties characteristic of Teflon ® fluoropolymer resins: non-ageing characteristics, chemical inertness, exceptional dielectric properties, low flammability, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption and excellent weather resistance. As an intermediate molecular weight resin Teflon ® FEP CJ 95 offers higher processing speeds than many FEP grades with similar high level of stress crack resistance. Stress crack resistance is an important element in establishing end-use performance. Extensive testing of wire and cable constructions is required for definitive performance evaluation. Experience shows that the MIT folding endurance or flex life test, performed on a thin film of resin, has established a good correlation with extensive cable testing. The higher the MIT flex life, the higher the stress-crack resistance of the resin. MIT test results should be viewed as a guide to comparative performance of the various grades of resin. We recommend that for applications involving repeated thermal and flex cycling, specific tests on the final cable always should be undertaken. See also DuPont's bulletin "Grade selector for Wire and Cable applications". |
产品描述 Product Description
厂家:美国科慕 Chemours
类别:FEP FEP
用途:电缆护套;电线电缆应用;绝缘材料;
加工条件:吹塑成型
性能特点: 低吸湿性; 防火阻燃等级V-0; 耐化学性; 耐高温; 低摩擦系数; 食品接触; 抗应力开裂; 耐候抗UV; 韧性好; Weather resistance is good,Good flexibility,Low coefficient of friction,Food contact compliance,High Heat Resistance,Solvent resistance,Low moisture absorption,High ESCR,V-0
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- |
2.13 | g/cm³ | ASTM D792 |
-- -- |
2.13 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
372℃,5.0kg 372℃,5.0kg |
5.0 | g/10min | ISO 12086 |
372℃,5.0kg 372℃,5.0kg |
5.0 | g/10min | ASTM D2116 |
吸水率 Water absorption rate |
|||
24hr 24hr |
< 0.010 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 868 | ||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
MPa | ISO 12086 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 12086 | |
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
ASTM D256 | ||
23℃ 23℃ |
ISO 180 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
连续使用温度 Continuous use temperature 2 |
℃ | ||
熔融温度 Melting temperature 5 |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
|||
0.25 mm 0.25 mm 4 |
kV/mm | ASTM D149 | |
0.25 mm 0.25 mm |
kV/mm | IEC 60243-1 | |
介电常数 Dielectric constant |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1.00 GHz 1.00 GHz |
ASTM D150 | ||
相对电容率 Relative permittivity |
IEC 60250 | ||
1 kHz 1 kHz |
IEC 60250 | ||
1.00 GHz 1.00 GHz |
IEC 60250 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
1 GHz 1 GHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
IEC 60250 | ||
1 kHz 1 kHz |
IEC 60250 | ||
1 GHz 1 GHz |
IEC 60250 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level 5 |
UL 94 | ||
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
极限氧指数 Extreme oxygen index |
% | ISO 4589-2 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Critical Shear Rate(372℃) Critical Shear Rate(372℃) |
sec^-1 | Internal Method | |
Guide DDR Range Guide DDR Range |
|||
for cable extrusion for cable extrusion |
|||
for tubing extrusion for tubing extrusion |
|||
MIT耐折强度(film,200.0 µm) MIT flexural strength (film, 200.0 µ m) |
Cycles | ASTM D2176 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 The continuous service temperature is based on accelerated heat-aging tests, and represents the temperature at which tensile strength and ultimate elongation retains 50% of the original values, after 20 000 h thermal aging When considering the use of Teflon ® FEP at elevated temperatures especially in combination with mechanical, electrical or chemical exposure, preliminary testing should be done to verify suitability. |
3 ASTM D4591 / D3418 |
4 方法A(短时间) |
5 - These results are based on laboratory tests, under controlled conditions, and do not reflect performance under actual fire conditions. - Current rating is a typical theoretical value |
【新闻资讯】查看全部
使用TPU 3D打印出灵活可扩展的印花连衣裙
2017-08-11 作为3D打印时尚世界的新人物,休斯敦的设计师Mora-Sanchez与CosineAdditive合作推出了新款时尚服装。她设计的可扩展3D印花连衣裙织布机已经在纺织制造行业掀起波浪,最近为Mora-Sanchez赢得了令人垂涎的詹姆斯.戴森奖和红点奖。 |
使用TPU 3D打印出灵活可扩展的印花连衣裙 做为三维打印时尚全球的新角色,休斯敦的室内设计师Mora-Sanchez与CosineAdditive协作发布了最新款时尚服饰。她设计方案的可拓展三维印花连衣裙纺织机早已在纺织品制造领域刮起波浪纹,近期为Mora-Sanchez获得了让人垂涎三尺的勒布朗詹姆斯.戴森奖和红点设计大奖。 “相信三维打印是时尚的将来,”Mora-Sanchez说。“伴随着现阶段的发展趋势,大家将造就出大量令人震惊的新品和原材料。”但行业发展比较落后,三维打印关键還是用以零配件和定义手工雕刻著作。Mora-Sanchez表述说。“尽管这条长裙很美丽动人,但它并并不是多功能性服饰,没法舒服地挪动和磨坏。” 设计过程遭受许多非正统逻辑思维的严厉打击。Mora-Sanchez表述说,虽然她的原始制造方式 是可选择性激光器煅烧(SLS)印刷,但熔断器长短制造(FFF)最后被证实是最好是的方式。 一样,Mora-Sanchez检测了几类不一样的原材料,以观查其功效实际效果。最后挑选了热固性聚氨酯材料(TPU)原材料。休斯敦室内设计师表明,这类专用型塑胶具有高耐磨性能,耐寒性,高弹力和高韧性的特点,及其耐酸碱和润滑油脂的额外优势。 从时尚和增材制造的视角开展自主创新。Mora-Sanchez设计方案的三维印花连衣裙具备扩展性、协调能力和最重要的可配戴性,代表了作用三维印刷的将来纺织产品。庆贺Mora-Sanchez得到优秀毕业论文奖,并变成三维印刷时尚的一个非常值得赞叹的进场点。 来源于:OFweek三维打印网 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
第三方认证:
抱歉!该牌号暂无认证数据。
价格走势图
开始时间:
结束时间:
材料厂家:
【牌号齐全,内容全面】
全网共2500+项牌号+上游原料单体+原油价格,最长可追溯近20年价格行情
【精准,及时,权威!】
专业团队挖掘行情信息,第一时间发布行情
抱歉!该牌号暂无认证数据。
免责声明:参考价格是搜料网根据网络大数据拟合分析的结果,仅供参考。实际成交价取决但不限于以下因素:下单时间,付款方式,交货方式,数量,税费,色号,产地,项目信息。
抱歉!暂无数据。
抱歉!暂无数据。