牌号简介 About |
---|
TOPAS 6013M-07是一种注塑级,具有宽加工窗口,特别适用于包括IBM和ISBM在内的吹塑工艺。它是一种玻璃透明的无定形聚合物,具有出色的防潮性,耐化学性,高纯度和非反应性表面,使其成为医疗保健和其他高科技产品的最佳选择。较低的可浸出物和TOPAS COC的可萃取物可保持内容物的稳定性和质量。它是一种非极性基质,不像玻璃罐那样促进吸附,变性,聚集或沉淀。该等级具有高(130°C)热变形温度,可承受121°C蒸汽灭菌协议,以及伽玛和EtO程序。 注塑成型,医疗保健,光学和诊断的相关等级 TOPAS 6015S-04 - 134°C协议的更高热变形温度(150°C) TOPAS 6017S-04 - 我们最耐热变形的IM级(HDT = 170°C) TOPAS 5013L-10 - 高流动等级; 润滑版,提供更好的加工多功能性 TOPAS 5013S-04 - 高流动等级,无润滑剂 TOPAS® 6013M-07 Product Description TOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures. Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility TOPAS 5013S-04 - high flow grade without lubricant TOPAS® 6013M-07 TOPAS® 6013M-07 is a Cyclic Olefin Copolymer (COC) product. It is available in Africa & Middle East, Asia Pacific, or Latin America. Characteristics include: Copolymer Good Aesthetics |
产品描述 Product Description
厂家:日本宝理 Polyplastics
类别:COC COC
用途:医疗/护理用品;电气/电子应用领域;光学应用;食品包装;瓶子;外科器械;吹塑成型应用;实验室器具;药品包装;管件;
颜色:清晰/透明
加工条件:注吹成型
性能特点: 耐酒精; 蒸汽消毒; 防潮; 耐化学性; 辐射消毒; 高纯度; 食品接触; 无卤; 共聚物; 无BPA; 低萃取物; 耐高温; 无定形的; 透光性好; 环氧乙烷消毒; 表面光泽度好; Good Clarity,Low extract,High purity,Good surface appearance,Steam sterilized,Ethanol tolerance,Halogen free,Food contact compliance,High Heat Resistance,Moisture resistance,No BPA,Radiation disinfection,Copolymer,Solvent resistance,Ethylene oxide disinfection,Amorphous
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.02 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
260℃,2.16kg 260℃,2.16kg |
12 | g/10min | ISO 1133 |
熔体体积流动速率 Melt Volume Rate |
|||
260℃,2.16 kg 260℃,2.16 kg |
13.0 | cm³/10min | ISO 1133 |
收缩率 Shrinkage rate 2 |
0.50 到 0.70 | % | 内部方法 |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
0.010 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-2/1A/1 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/1A/50 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ISO 527-2/1A/50 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
玻璃化转变温度 Glass transition temperature |
℃ | ISO 11357-2 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
ISO 489 | ||
透光率 Transmittance |
% | ISO 13468-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dependent on process conditions and part design. |
3 10°C/min |
【新闻资讯】查看全部
注塑塑料制品中的金属嵌件要停止热处理的缘由
2017-09-19 注塑制品中镶有金属嵌件是为了提高塑料制品的工作强度和增加塑料制品的使用功能 (如改善导电性或方便与其他件的连接等)。 由于金属镶嵌件与塑料的热性能和收缩率的差别很大,所以,注射进入成型模具腔中的熔 |
注塑塑料制品中的金属嵌件要停止热处理的缘由 注塑制品中镶有金属嵌件是为了更好地提升塑料产品的工作强度和提升塑料产品的应用作用 (如改进导电率或便捷与别的件的联接等)。 因为金属镶嵌件与塑料的热特性和缩水率的区别非常大,因此 ,注入进到成形模貝腔中的熔料在金属镶嵌件周边的温度减少得十分快,使这附近塑料造成应力状况,比较严重时还会继续出現裂痕,使俩件的联接坚固性减少。 为了更好地调整金属嵌件的温度与塑料注入时温度趋向贴近、变小俩件镶嵌时的温度差,镶嵌件在与熔料成形前务必开展加温提温解决,加温温度一般在110℃之上,针对直徑较小的金属嵌件,注入熔料温度会迅速将其加温,故一般不用开展加热解决。 来源于:环球塑化网 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
价格走势图
开始时间:
结束时间:
材料厂家:
【牌号齐全,内容全面】
全网共2500+项牌号+上游原料单体+原油价格,最长可追溯近20年价格行情
【精准,及时,权威!】
专业团队挖掘行情信息,第一时间发布行情
抱歉!该牌号暂无认证数据。
免责声明:参考价格是搜料网根据网络大数据拟合分析的结果,仅供参考。实际成交价取决但不限于以下因素:下单时间,付款方式,交货方式,数量,税费,色号,产地,项目信息。
抱歉!暂无数据。
抱歉!暂无数据。