牌号简介 About |
---|
沙特基础工业公司(SABIC)的高密度聚乙烯(HDPE)级产品在受控条件下生产,产品质量高、一致性好、纯度高。SABIC® HDPE PCG300054是一种高密度聚乙烯共聚物注塑级。其分子量分布窄,流动性好,翘曲度低,刚性好,光泽好,成型周期快。SABIC® HDPE PCG300054建议用于医疗包装应用,如注射器、盖子和封口、薄壁物品和医疗设备的其他零件。SABIC® HDPE PCG300054符合欧洲药典(EP)和美国药典(USPVI)的相关专著。本发明所述产品不得用于医疗保健设备或用于人体内临时或永久实施的材料。 SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG300054 is a high density polyethylene copolymer injection moulding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, excellent gloss and fast moulding cycles. SABIC® HDPE PCG300054 is recommended for healthcare packaging applications like, syringes, caps and closures, thin wall articles and other parts for medical devices. SABIC® HDPE PCG300054 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.954 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
ISO 1133 | ||
190℃,2.16kg 190℃,2.16kg |
30 | g/10min | ISO 1133 |
190℃,5.0kg 190℃,5.0kg |
80 | g/10min | ISO 1133 |
熔体体积流动速率 Melt Volume Rate |
ISO 1133 | ||
190℃,2.16 kg 190℃,2.16 kg |
40.0 | cm³/10min | ISO 1133 |
190℃,5 kg 190℃,5 kg |
105 | cm³/10min | ISO 1133 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/A | ||
-30℃,模压成型 -30 ℃, molded |
kJ/m² | ISO 180-A | |
23℃,模压成型 23 ℃, molded |
kJ/m² | ISO 180-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
熔融温度 Melting temperature |
|||
DSC DSC |
℃ | DIN 53765 | |
Enthalpy Change Enthalpy Change |
J/g | DIN 53765 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ISO 868 | ||
拉伸模量 Tensile modulus |
|||
2 mm,模压成型 2 mm, molded into shape |
MPa | ISO 527-2/1BA/50 | |
拉伸强度 tensile strength |
ISO 527-2/1BA/50 | ||
屈服,2 mm,模压成型 Yield, 2 mm, molded |
MPa | ISO 527-2/1BA/50 | |
断裂,2 mm,模压成型 Fracture, 2 mm, molded |
MPa | ISO 527-2/1BA/50 | |
拉伸应变 Tensile strain |
|||
断裂,2 mm,模压成型 Fracture, 2 mm, molded |
% | ISO 527-2/1BA/50 | |
拉伸蠕变模量 Tensile creep modulus |
ISO 899-1 | ||
1 hr 1 hr |
MPa | ISO 899-1 | |
1000 hr 1000 hr |
MPa | ISO 899-1 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
帝斯曼今后仍将专注于工程塑料范围
2016-01-20 作为全球生命科学与材料科学领先企业,荷兰皇家帝斯曼集团在7月份迎来了DSM工程塑料新任全球总裁,Roeland Polet被任命为帝斯曼工程塑料业务部全球总裁,接替Roelof Westerbeek的职位。 Roeland Polet在加入帝斯曼之前,就职于威士伯公司,担任全球工业和企业发展部高级副总裁,在明尼阿波利斯(美国)和上海(中国)工作。Roeland拥有美国和荷兰双重国籍,具有丰富的国际工作和生活经验。在威士伯公司任职期间,他负责领导全球工业涂料业务部,并且是公司 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |