牌号简介 About |
---|
Silopren® LSR 2650是一种双组分液体硅橡胶注射成型工艺。与Silopren LSR 2050相比,Silopren® LSR 2650显示出更低的粘度、更好的撕裂阻力和更高的反应活性。因此,在保持标准交联率的同时,也可以降低硫化温度。增加的反应性不影响硫化胶的性能。Silopren® LSR 2650硫化胶的主要特点和优点主要有以下特性:高反应性、低粘度、较短的循环时间、良好的热稳定性、生物相容性、可与环氧乙烷、蒸汽和γ辐射灭菌、在低温下的稳定性和柔韧性、良好的橡胶样特性、较高的热稳定性和弹性。耳部电阻在动态应力下使用寿命长,对臭氧和紫外线的稳定性高,抗老化性能优异,在广泛的温度范围内具有优异的介电性能,易于用LSR色浆进行着色,KTW因其优异的性能而批准了潜在的应用,Silopren® LSR 2650是一个很好的选择,可用于以下弹性制品的规格:密封元件O形环止动器隔膜小键盘波纹管导管奶嘴奶嘴婴儿奶嘴呼吸装置减震器通风口活门开关盖乳房罩鼻垫压力锅零件火花塞靴电缆连接器导管,医疗技术设备零件S.O. Silopren LSR 2650 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren LSR 2050, Silopren LSR 2650 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate. Key Features and Benefits Vulcanizates of Silopren LSR 2650 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Easily pigmentable with LSR color pastes KTW approved Potential Applications Because of its outstanding properties, Silopren LSR 2650 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Diaphragms Keypads Bellows Catheters Pacifiers Baby teats Respiratory devices Vibration dampers Air vent flaps Switch cover Breast shields Nose pads Pressure cookers parts Spark plug boots Cable connectors Catheters, parts of medical technical equipment s.o. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | DIN 53479 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
52 | DIN 53505 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
10.0 | MPa | DIN 53504 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
550 | % | DIN 53504 |
压缩形变 Compression deformation |
|||
175℃,22 hr 175℃,22 hr |
25 | % | DIN 53517 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
后固化时间 Post curing time |
|||
200℃ 200℃ |
hr | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Vulcanization(175℃) Vulcanization(175℃) |
min | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
|||
-- -- 3 |
|||
粘度 viscosity |
DIN 53018 | ||
20℃ 20℃ 2 |
Pa·s | DIN 53018 | |
20℃ 20℃ 3 |
Pa·s | DIN 53018 | |
储存稳定性 storage stability |
|||
20 ℃ 20 ℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part B |
3 Part A |
【新闻资讯】查看全部
丹邦科技存款2亿,建立TPI薄膜碳化技术改造项目
2016-12-29 12月26日,丹邦科技第三届董事会第十五次会议在公司三楼会议室以现场与通讯相结合的方式召开。会议应参加董事5人,实际参加董事5人(独立董事潘玲曼、陈文彬以通讯方式参加会议)。本次会议由董事长刘萍先生主持,公司部分监事和高级管理人员列席了会议。 本次会议以书面记名投票的方式表决通过了如下议案:以5票同意、0票反对、0票弃权,审议通过了《关于向中国工商银行股份有限公司深圳喜年支行申请人民币20000万元固定资产贷款的议案》同意公司向中国工商银行股份有限公司深圳喜年支行申请人民币 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |