牌号简介 About |
---|
AOC的VipelF010系列是一种溶于苯乙烯的双酚A环氧乙烯基酯树脂。VIPEL F010系列非常适合用于手工铺层、喷涂、纤维缠绕、SMC和拉挤成型工艺,其中突出的机械性能和优异的耐化学品和耐热性是必需的。优点:多功能宽配方设计功能可用于许多流程,并可优化成本/性能。独特的组成产生了一个坚韧和多用途的树脂,具有优异的裂缝和耐开裂性的模件。Vipel F010适用于承受特别高静态或动态载荷的模具,如管道、水箱、管道工程和地板应用。乙烯基酯树脂具有优异的耐热性。耐腐蚀性强的VipelF010对过氧化氢和碱有很高的抵抗力,在次氯酸盐和氯气生产的各个阶段表现良好。请参阅AOC的“耐腐蚀树脂指南”,了解耐腐蚀信息或有关树脂适用于任何特定化学环境的问题,请联系AOC。 AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. BENEFITS Versatile Wide formulating capabilities allow for use in many processes and for optimization of cost/performance. Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts. Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat. Corrosion Resistance Vipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
苯乙烯含量 styrene content |
43 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
120 | ℃ | ASTM D648 |
玻璃化转变温度 Glass transition temperature |
130 | ℃ | DIN 53445 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
> 1.0E+13 | ohms | DIN 53482 |
体积电阻率 Volume resistivity 2 |
> 1.0E+16 | ohms·cm | DIN 53482 |
介电强度 Dielectric strength |
|||
0.7 mm 0.7 mm |
kV/mm | DIN 53481 | |
介电常数 Dielectric constant |
DIN 53483 | ||
60 Hz 60 Hz 2 |
DIN 53483 | ||
60 Hz 60 Hz 3 |
DIN 53483 | ||
1 kHz 1 kHz 2 |
DIN 53483 | ||
1 kHz 1 kHz 3 |
DIN 53483 | ||
1 MHz 1 MHz 2 |
DIN 53483 | ||
1 MHz 1 MHz 3 |
DIN 53483 | ||
耗散因数 Dissipation factor |
DIN 53483 | ||
60 Hz 60 Hz 2 |
DIN 53483 | ||
60 Hz 60 Hz 3 |
DIN 53483 | ||
1 kHz 1 kHz 2 |
DIN 53483 | ||
1 kHz 1 kHz 3 |
DIN 53483 | ||
1 MHz 1 MHz 2 |
DIN 53483 | ||
1 MHz 1 MHz 3 |
DIN 53483 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Critical Strain Energy Critical Strain Energy |
J/m² | ASTM E399 | |
Gel to Peak Gel to Peak |
min | ||
放热峰值 exothermic peak |
℃ | ||
Stress Intensity Factor Stress Intensity Factor |
ASTM E399 | ||
触变指数 Thixotropic index 4 |
|||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ||
粘度 viscosity |
|||
布络克菲尔德 LV,25℃ 25℃,Brookfield LV |
Pa·s | ||
胶凝时间 Gelation time |
|||
25℃ 25℃ |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
巴氏硬度 Babbitt hardness |
ASTM D2583 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 after 24 hrs in drinking water |
3 Dry |
4 6/60 Thix Index |
【新闻资讯】查看全部
2018第四届聚烯烃开发峰会在西安举行
2018-11-09 11月7~9日,聚烯烃产业创新联盟、上海聚朴新材料科技有限公司与西安石油大学联合主办的2018第四届中国聚烯烃大会暨首届聚烯烃专用料开发峰会在西安举行,来自聚烯烃行业的专家、学者和企业代表,围绕烯烃聚合催化剂发展趋势、聚烯烃新产品开发、装置智能化等前沿技术深度剖析深入讨论交流。西安石油大学副校长李华出席开幕式并致辞。 “烯烃聚合负载型齐格勒-纳塔(Z-N)催化剂催化活性高,对杂质不很敏感,稳定性相对较好,适应多种聚合工艺,有利于装置长周期稳定连续化生产运行。同时该催化剂成本 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |