牌号简介 About |
---|
TECNOFLON® P 959是一种中等粘度、高含氟量(70%)、过氧化物可硫化含氟弹性体。具有优异的耐受各种化学物质和优异的加工性能、理想的压缩形变率。 Tecnoflon® P 959可以通过有机过氧化物和助剂进行交联。 Tecnoflon® P959的一些基本特性包括: -后固化率低 -优异的模内流动性 -不会造成模内结垢 -出色的脱模性能 -良好的耐化学性,尤其是: --含酒精燃料 --蒸汽 --含胺添加剂的流体 Tecnoflon® P 959 可用于模压、注塑和传递模塑成型轴密封件、阀密封件、O型环、垫圈及其它具有优异耐化学性能的部件。 Tecnoflon® P 959可以与固化系统和其它常规含氟弹性体配混材料混合。混合机械可用双辊研磨机或密炼机。成品可采用各种橡胶加工方法制备。这种材料可以挤塑成软管或型材,也可压延成片材或带材。 TECNOFLON® P 959 is a medium viscosity, high fluorine (70%), peroxide curable fluoroelastomer. Tecnoflon® P 959 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability and optimum compression set. Tecnoflon® P 959 can be cross-linked using organic peroxides in conjunction with a co-agent. Some of the basic properties of TECNOFLON® P 959 are: Low post cure Superior mold flow Lack of mold fouling Excellent mold release Good chemical resistance especially in: Alcohol containing fuels Steam Fluids containing amine additives Tecnoflon® P 959 can be used for compression, injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 959 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods may be produced by a variety of rubber processing methods.This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
门尼粘度 Mooney viscosity 2 |
|||
ML 1+10,121℃ ML 1+10,121℃ 2 |
48 | MU | |
氟含量 Fluorine content 2 |
70 | % |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 聚合物原料 |
【新闻资讯】查看全部
天津石化环氧丙烷项目压缩机试车
2022-05-25 近日,由中国石化上海工程公司总承包、中国石化炼化工程四建公司承建的天津分公司15万吨/年CHP法制环氧丙烷项目首台KM-403压缩机空负荷试车一次成功,运行数据各项机械性能均达到 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |