牌号简介 About |
---|
Prime ABS Weather-X 100是一种带有丙烯酸共挤盖的ABS基板。如有要求,可在背面挤出一层薄薄的丙烯酸树脂进行硬化处理。它具有良好的耐候性、耐化学性和高光泽和良好的DOI。应用:本产品非常适合户外应用,如船用、ATV、RV、浴缸和淋浴包或任何需要上述特性的地方。加工:本产品的成型条件为:表面温度=300-390°F模具温度=110-185°F插头温度=220-300°F模具温度=200°F模具收缩率=0.005-.008英寸/英寸板材的一次侧不应加热到二次侧。精加工:本产品的零件可与机械螺钉、螺栓、螺母、垫圈、铆钉和弹簧钢紧固件连接。螺纹切削或螺纹成型螺钉是固定单独零件的经济方法。也可采用冲压和快速焊接技术、声波焊接和化学键合。请与Primex塑料公司代表联系,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能:有多种颜色可供选择,但是,请与Primex代表联系以了解具体颜色。通常,该产品是光滑的,但是,有几个模式可供选择,如毛细胞,卡尔夫格雷和黎凡特。 Prime ABS Weather-X 100 is an ABS substrate with an Acrylic co-extruded cap. If requested a thin layer of Acrylic can be extruded on the back side for rigidizing. It offers good weatherability, chemical resistance, and high gloss with good DOI. Applications: This product is ideal for outdoor applications such as marine, ATV, RV, Tub & Shower Surrounds or anything where the above characteristics are required. Processing: Forming conditions for this product are: Surface Temperature =300-390° F Mold Temperature = 110-185° F Plug Temperature = 220-300° F De-mold = 200° F Mold Shrink = .005 - .008 in/in Primary side of sheet should not be heated as much as the secondary side. Finishing: Parts from this product may be joined with machine screws, bolts, nuts, and washers, rivets and spring steel fasteners. Thread cutting or thread-forming screws are an economical means of securing separate parts. Press and snap techniques, sonic welding and chemical bonding may also be used. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: There are many colors available, however, please check with your Primex representative for specific colors. Typically this product is smooth, however, there are several patterns available, such as haircell, calfgrain & levant. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,10.0kg 230℃,10.0kg |
6.5 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
0.30 到 0.50 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
41.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
29 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
22℃,3.2mm 22℃,3.2mm |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火,3.2 mm 0.45 MPa, unannealed, 3.2 mm |
℃ | ASTM D648 | |
1.8 MPa,未退火,3.2 mm 1.8 MPa, unannealed, 3.2 mm |
℃ | ASTM D648 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
De(mold Temperature) De(mold Temperature) |
℃ | ||
模具温度 Mold temperature |
|||
other other |
℃ | ||
Plug Temperature Plug Temperature |
℃ | ||
Surface Temperature Surface Temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
从热解轮胎中提炼出炭黑母粒
2021-08-24 搜料网资讯: 对于塑料行业来说,在尽量减少化石资源的使用方面,每一点都很重要,这一点现在也延伸到了小批量色母料。德国Rowa色母料首次推出了一种新的炭黑母料EcoPA-B095A BLACK |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |