牌号简介 About |
---|
说明:E1028A是一种以脂肪酸为乳化剂,用盐酸凝结的高苯乙烯、热乳液的丁苯共聚物。它是稳定的非染色抗氧化剂。本产品不含亚硝胺促进剂,符合FDA 21 CFR第175.300条、第177.1210条和第178.3910条有关食品接触应用的规定。应用:E1028A的颜色非常浅。它具有绿色强度高、透气性低、流动性好的特点,推荐用于粘合剂、密封剂、轮胎衬里、机械产品和家用产品中。 RIGID DI-PAK R-4200 A low viscosity, long working life compound designed for potting/encapsulating units requiring high physical strength, and excellent penetration & adhesion to components. DI-PAK R-4200 holds its mechanical & electrical properties while under the most severe conditions, due to its low water absorption, and retention of strength at elevated temperatures. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | ASTM D4669 |
收缩率 Shrinkage rate |
|||
MD MD |
0.15 到 0.35 | % | ASTM D2566 |
Weight(per cubic inch) Weight(per cubic inch) |
18 | g | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
33 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
41 | J/m | ASTM D256 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
100 kHz 100 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
25℃,100 kHz 25℃,100 kHz |
ASTM D150 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D4878 | |
脱模时间 stripping time |
|||
79℃ 79℃ |
min | ||
121℃ 121℃ |
min | ||
胶凝时间 Gelation time 2 |
|||
25℃ 25℃ 2 |
hr | ASTM D2971 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
去年四季度美国乙烯产量出现大幅增长
2018-02-05 据普氏能源资讯网休斯敦1月31日消息,美国燃料和石化制造商协会(AFPM)周三公布的数据显示,2017年第四季度美国乙烯产量出现增长,而库存低于第三季度的水平。 数据显示,第四季度美国乙烯产量达到157.39亿磅,比三季度142.65亿磅的产量增加14.74亿磅。2017年美国乙烯总产量为605.43亿磅,比2016年581.2亿磅的产量增加近24.23亿磅。 AFPM称,去年第四季度美国的乙烯产量比2016年同期增加10.28亿磅,当时的产量为147.11 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |