牌号简介 About |
---|
警告:此材料的状态为“商业:限量发行”。此材料的数据最近尚未验证。在指定此等级之前,请联系RTP公司以获取当前信息。-根据RTP公司的初步产品数据-RTP 3281是10%碳纤维增强乙烯四氟乙烯。该产品具有优异的耐热性、耐化学性和良好的耐磨性。 Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.- RTP 3281 is a 10% carbon fiber reinforcement ethylene tetrafluoroethylene. This product exhibits excellent heat and chemical resistance along with good wear properties. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.75 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD:3.2 mm MD:3.2 mm |
0.60 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.020 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
60.7 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
10 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm 3.2mm |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
3.2 mm 3.2 mm |
J/m | ASTM D4812 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
Shape Memory Medical可在美国市场销售其妨碍栓塞头
2018-07-24 最近,Shape Memory Medical公司(美国加利福尼亚州,Santa Clara)获得了美国食品和药物管理局批准,可在美国市场销售其阻碍栓塞头。该装置基于形状记忆聚合物(SMP)技术,旨在减少或阻碍脉管系统的血流速度。 于2017年,这项由国家生物医学成像和生物工程研究所(NIBIB)资助的技术,在欧洲和其他承认CE标志的国家被批准使用,是一种新的栓塞方法,包括诱发或产生血块。 在栓塞过程中,导管被穿过血管系统,引导能使血管凝结的材料进入治疗部位 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |