公司信息及水印
牌号简介 About |
---|
采用Unipol-PP工艺,将气相流化床反应器技术的生产效率与高活性立体定向催化剂系统相结合,制备了repol聚丙烯C005EG。建议将repol c005eg用于以高熔融强度为标准的挤出和成型工艺。它是制造污水处理、灌溉、化工、食品工业和其他低压应用管道的理想材料。也可用于聚乙烯和聚丙烯管道的压接件的成型。 REPOL Polypropylene C005EG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific catalyst system. Repol C005EG is recommended for use in Extrusion and Moulding processes where high melt strength is the criteria. It is an ideal material for making pipes for effluent treatment, irrigation, chemical industries, food industries and for other low pressure applications. It can also be used in moulding of compression fittings for PE & PP pipes. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
0.50 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 1 |
|||
屈服 yield 1 |
26.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 1 |
|||
屈服 yield 1 |
10 | % | ASTM D638 |
弯曲模量 Bending modulus 2 |
|||
1% 正割 1% secant 2 |
1000 | MPa | ASTM D790-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
300 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 2.0 in/min |
3 类型 1 |
【新闻资讯】查看全部
日本部分聚烯烃产品涨价
2021-05-30 搜料网资讯: 继普瑞曼聚合物等3家日本化企宣布产品涨价后,近日,宇部丸善聚乙烯和东曹公司也跟进宣布产品涨价。两家公司涨价均从明年1月21日起执行。宇部丸善的聚乙烯(PE)产品 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |