牌号简介 About |
---|
60分钟的增韧树脂输液系统室温下,低粘度环氧树脂系统应用BCC产品XP 2014-003R/H是一个60分钟,非常低粘度但很难生产复合材料部件或工具的系统,使用输液过程,如真空辅助树脂转移成型、RTM或其他输液过程。 60-Minute Toughened Resin Infusion System Room Temperature, Low Viscosity Epoxy Resin System Applications BCC Products XP 2014-003R/H is a 60-minute, very low viscosity—yet tough—system for the production of composite parts or tools using an infusion process such as Vacuum Assisted Resin Transfer Molding, RTM or other infusion processes. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD 2 |
< 0.10 | % | |
MD MD 3 |
0.15 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
-- -- 4 |
49 | ℃ | |
-- -- 5 |
70 | ℃ | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Resin Resin |
|||
Hardener Hardener |
|||
粘度 viscosity |
|||
24℃ 24℃ 6 |
Pa·s | ||
24℃ 24℃ 7 |
Pa·s | ||
24℃ 24℃ 8 |
Pa·s | ||
固化时间 Curing time |
|||
80℃ 80℃ |
hr | ||
24℃ 24℃ |
hr | ||
胶凝时间 Gelation time |
|||
24℃ 24℃ |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
-- -- 4 |
MPa | ||
-- -- 5 |
MPa |
备注 |
---|
2、Cured 7 days at RT |
3、Cured 8 hrs at 80°C |
4、RT Cure |
5、176°F (80°C) Cure |
6、Hardener |
7、Mixed |
8、Resin |
【新闻资讯】查看全部
由纤维素和水制成的环保塑料
2021-07-29 搜料网资讯: 塑料对社会有许多好处,并广泛应用于我们的日常生活中:它们重量轻、价格便宜、适应性强。然而,塑料的生产、加工和处理是不可持续的,往往会对环境和人类健康构 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |