牌号简介 About |
---|
低密度I-皮肤泡沫系统(天然颜色)HFC 245FA吹塑,双组分微孔聚氨酯泡沫系统,用于制造在低成型密度下需要良好皮肤的混杂整体皮肤制品。根据应用要求和加工条件,该系统可以在低模具温度下在金属工具中铸造时提供特殊的表皮形成,在低压和高压设备上,铸造密度范围从10到25 PCF,硬度范围从10到70邵尔A宽加工窗口。 Low density I-skin foam system (natural color) HFC 245fa-blown, two-component microcellular polyurethane foam system designed for molding of miscellaneous Integral Skin articles that require good skin at relatively low molded densities. Depending on the application requirements and the processing conditions this system can provide Exceptional skin formation when casted in metal tools at low mold temperatures Wide range of molded densities from 10 to 25 pcf Hardness range from 10 to 70 Shore A Wide processing window on both low-pressure and high-pressure equipment |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
0.256 | g/cm³ | |
-- -- 3 |
0.320 | g/cm³ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A 2 |
45 | ||
邵氏 A Shaw's A 3 |
55 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield 2 |
1.17 | MPa | |
屈服 yield 3 |
MPa | ||
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D412 | |
撕裂强度 tear strength |
|||
-- -- 4 , 2 |
kN/m | ||
-- -- 4 , 3 |
kN/m | ||
开裂 cracking 2 |
kN/m | ||
开裂 cracking 3 |
kN/m | ||
压缩形变 Compression deformation |
|||
70℃,22 hr 70℃,22 hr 2 |
% | ||
70℃,22 hr 70℃,22 hr 3 |
% | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
燃烧速率 Burning rate |
|||
-- -- 2 |
mm/min | ||
-- -- 3 |
mm/min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
备注 |
---|
2、Hand Mix |
3、High Pressure |
4、C 模具 |
【新闻资讯】查看全部
安特卫普港前9个月液体化学品贸易下降了7%以上
2020-10-20 搜料网资讯: 比利时最大的海湾安特卫普港表示,2020年前9个月,液态化学品进口同比下降11.5%。据《化学周刊》报道,同期液态化学品出口同比增长2.8%,因此截至9月底,液态化学品贸 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |