牌号简介 About |
---|
矿物和玻璃纤维增强注塑等级是一个热稳定和耐候等级。它提高了抗紫外线和抗沉痕性。矿物纤维和玻璃纤维的结合产生了高性能、低翘曲和经济有效的工程热塑性塑料。具有强度高、抗紫外线、刚性好、热变形温度高等特点。它在负载下具有较高的抗蠕变能力。热稳定系统延长了其在高温下的性能保持。它对油脂、油和碳氢化合物具有良好的耐化学性。该等级通常适用于转子、车轮、轮缘、正时皮带罩、汽车冷却风扇、覆环和所有暴露在环境中的外部零件等应用。 Mineral and glass fiber reinforced injection moulding grade is a heat stabilized and weather resistant grade. It has improved UV resistance and sink mark resistance. The combination of mineral and glass fibers result in a high performance, low warp and cost effective engineering thermoplatics. It exhibits high strength, good UV resistance, rigidity and good heat distortion temperatures. It has a relatively high resistance to creep under load. The heat stabilizer system extends its retention of properties at elevated temperatures. It has a good chemical resistance to greases, oils and hydrocarbons. The grade is generally recommended for applications such as rotors, wheels, rims, timing belt covers, automotive cooling fans, shrouds, and all external parts exposed to the environment. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.48 | g/cm³ | ASTM D792 |
表观密度 Apparent density |
0.70 | g/cm³ | |
吸水率 Water absorption rate |
ASTM D570 | ||
24hr 24hr |
0.90 | % | ASTM D570 |
饱和 saturated |
5.7 | % | ASTM D570 |
平衡,50% RH Balance, 50% RH |
1.6 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Polymer Abbreviation Polymer Abbreviation |
备注 |
---|
2 51 mm/min |
【新闻资讯】查看全部
抚顺石化炼油化工片面同步复工联合大检修
2017-06-22 6月20日,室外39摄氏度,抚顺石化检修现场处于“烧烤模式”,近万名参检员工用饱满的热情投入,快速推进检修工作。 这是抚顺石化“千万吨炼油、百万吨乙烯”工程投产以来,首次四年一修,也是炼油化工全面同步停工 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |