PP共聚，Borealis PP BE375MO对比PP共聚，Bormed™ BE860MO物性表,价格行情_搜料

牌号信息	Borealis PP BE375MO 物性表 PP共聚 & 奥地利北欧化工指导价格：暂无塑料库存：缺货	Bormed™ BE860MO 物性表 PP共聚 & 奥地利北欧化工指导价格：暂无塑料库存：缺货
牌号简介	BE375Mo是一种异相共聚物。该等级具有高冲击强度和刚度的最佳组合。这一等级是为优良的抗静电性能而制定的。48小时后静电荷小于2秒（Borealis法）。成核、良好的流动性能和高刚度为缩短循环时间创造了很大的潜力。 BE375MO is a heterophasic copolymer. This grade is characterized by optimum combination of high impact strength and stiffness. This grade is formulated for an excellent antistatic performance. Electrostatic charge is <2 s after 48 h (Borealis method). Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction.	Bormed™ BE860MO是一种异相共聚物。这一等级的特点是具有优异的冲击强度，即使在低温下，结合高刚度和良好的流动性能。应用：瓶盖和瓶盖制药和诊断包装 Bormed BE860MO is a resin intended for evaluation for use in Healthcare applications. BormedTM BE860MO is a heterophasic copolymer. This grade is characterized by an easy flow and excellent impact strength even at negative temperatures. CAS-No.: 9010-79-1 Applications Bormed BE860MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed BE860MO . Bottles and containers for tablets Caps and closures Bottles and containers for powder Connectors for tubing Bottles and containers for granules This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features Good impact strength at low temperature Good flow behaviour

产品描述
厂家：	奥地利北欧化工 Borealis AG	奥地利北欧化工 Borealis AG
类别：	PP共聚 PP copolymer	PP共聚 PP copolymer
填料：
用途：	薄壁部件,桶	药品包装,护罩,外壳
性能特点：	机械强度好,冲击性能好,易流动,成核的,成型周期快,共聚物,抗静电 Good Rigidity,High impact resistance,Good liquidity,Nucleation,Quick molding cycle,Copolymer,Antistatic property	机械强度好,冲击性能好,易流动,共聚物,耐低温冲击 Good Rigidity,High impact resistance,Good liquidity,Copolymer,low-temperature impact resistance
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL Borealis PP BE375MO Bormed™ BE860MO 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183

收缩率
Shrinkage rate %

熔体质量流动速率(230℃，2.16kg)
Melt Flow Rate g/10min ISO 1133

冲击性能
IMPACT Borealis PP BE375MO Bormed™ BE860MO 单位
UNIT 测试方法
TEST METHOD

多轴向仪器化冲击能量(-20℃，Total Penetration Energy)
Multi axial instrumented impact energy J ISO 6603-2

多轴向仪器化冲击能量(0℃，Total Penetration Energy)
Multi axial instrumented impact energy J ISO 6603-2

简支梁缺口冲击强度(-20℃)
Charpy Notched Impact Strength kJ/m² ISO 179/1eA

简支梁缺口冲击强度(23℃)
Charpy Notched Impact Strength kJ/m² ISO 179/1eA

热性能
THERMAL Borealis PP BE375MO Bormed™ BE860MO 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/B

机械性能
MECHANICAL Borealis PP BE375MO Bormed™ BE860MO 单位
UNIT 测试方法
TEST METHOD

拉伸应变(屈服)
Tensile strain % ISO 527-2/50

拉伸应变(屈服，注塑成型)
Tensile strain % ISO 527-2/50

拉伸强度(屈服)
tensile strength MPa ISO 527-2/50

拉伸强度(屈服，注塑成型)
tensile strength MPa ISO 527-2/50

拉伸模量
Tensile modulus MPa ISO 527-1-2

拉伸模量(注塑成型)
Tensile modulus MPa ISO 527-1-2

洛氏硬度(R 级)
Rockwell hardness ISO 2039-2

加工方式

注射 Borealis PP BE375MO Bormed™ BE860MO 单位测试方法

保压 MPa

加工熔体温度 °C

模具温度 °C

注射速度

备注

1 一般属性：这些不能被视为规格。

2 Injection molded specimen

1 一般属性：这些不能被视为规格。

2 Injection molded specimen


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
机械性能
加工方式
注射
备注
返回顶部

PP共聚，Borealis PP BE375MO对比PP共聚，Bormed™ BE860MO对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别