Amodel® AT-1116 HS
PPA & 比利时索尔维
Amodel® AT-6115 HS
PPA & 比利时索尔维
牌号信息 |
PPA & 比利时索尔维 指导价格:94500.0元/吨 塑料库存: 10625kg |
PPA & 比利时索尔维 指导价格:81900.0元/吨 塑料库存: 3750kg |
|
牌号简介 |
Amodel AT- 1116 HS是16%玻纤增强聚邻苯二甲酰胺(PPA)增韧热稳定型树脂,专门为了适应需要高刚度、高尺寸稳定性、耐化学性和延展性的高成本效益产品而设计。具有高热变形温度、高弯曲弹性模量。断裂伸长比非增韧玻纤增强PPA高 。 常规应用包括轴承、轴承保持架/轴承罩、外壳、化学处理设备用组件、电动机架、运动器材、草坪及园艺设备和需要压接或卡扣装配的部件。 - 黑色: AT-1116 HS BK 324 本色:AT-1116 HS NT Amodel® AT-1116 HS polyphthalamide (PPA) is a toughened, heat stabilized 16% glass reinforced resin, designed as a cost effective solution for applications requiring stiffness, good dimensional stability, chemical resistance and ductility. This resin has a high heat deflection temperature and a high flexural modulus, with greater tensile elongation than untoughened glass reinforced PPA. Typical applications include bearings, bearing retainers/cages, housings, chemical processing equipment components, motor frames, sporting equipment, lawn and garden equipment and components that require press-fit or snap-fit assembly. Black: AT-1116 HS BK 324 Natural: AT-1116 HS NT |
Amodel AT- 6115 HS是15%玻纤增强增韧级聚邻苯二甲酰胺(PPA)树脂,伸长率高于其它15%玻纤增强牌号AMODEL树脂。专为汽车卡扣式电子连接器开发。流动性好,成型周期短。 - 黑色: AT-6115 HS BK 324 本色:AT-6115 HS NT Amodel® AT-6115 HS is a 15% glass-fiber reinforced, toughened grade of polyphthalamide (PPA) resin designed to possess more elongation than other 15% glass-fiber reinforced grades of Amodel resin. This grade was developed for automotive snap-fit electronic connectors. It offers high flow and short molding cycles. Black: AT-6115 HS BK 324 Natural: AT-6115 HS NT |
|
产品描述 | |||
厂家: | 比利时索尔维 Solvay | 比利时索尔维 Solvay | |
类别: | PPA PPA | PPA | |
填料: | 玻璃纤维 16 | 玻璃纤维 15 | |
用途: | 线轴,连接器,汽车的发动机罩下的零件,轴承,机器/机械部件,工业应用,汽车领域的应用,金属取代,工业部件,通用,汽车电子 | 工业应用,通用,机器/机械部件,汽车电子,工业部件,阀门/阀门部件,连接器,外壳,汽车的发动机罩下的零件,汽车领域的应用,金属取代 | |
性能特点: | 冲击性能好,尺寸稳定性好,耐高温,耐化学性,热稳定性好 High impact resistance,Good Dimensional Stability,High Heat Resistance,Solvent resistance,Heat Stabilized | 拉伸性能好,成型周期快,冲击性能好,热稳定性好,流动性高,润滑性,含脱模剂 Good Tensile Strength,Quick molding cycle,High impact resistance,Heat Stabilized,High liquidity,Lubricating,Good stripping performance | |
加工条件: | 注射成型 Injection Molding | 水温模具注塑成型 |
备注 |
1 一般属性:这些不能被视为规格。
2 Maximum Load: 200 lb (890 N)
3 最大负载:240 lb (1070 N)
|
1 一般属性:这些不能被视为规格。
|
价格走势对比图
PPA Amodel® AT-1116 HS
PPA Amodel® AT-6115 HS
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交